Home » Showroom » » Products » Hid » Ballast Dimension: 10×7×3.2
Company Info
Guangzhou Liangdi Electronic Co. , Ltd. Guangzhou Liangdi Electronic Co. , Ltd.

Street Address: 1/F Yongfu Center, 35 Yongfu Rd, Yuexiu District

City: Guangzhou

Province: Guangdong

Country/Region: China

View Contact Details

Ballast Dimension: 10×7×3.2e-catalog[e-Catalog]

Ballast Dimension: 10×7×3.2

Application:  General

Market Type:  After Market

Applicationt: 

General

Production Description:

General:

Ballast specification: 12V or24V / 35W, 42W, or 50W

Dimension: 10×7×3.2

Weight: 0.37 kg

Maximum cable length: 500mm

Operating temperature: -40 to105 °C

Expected ballast life: >3500 hrs

Turn on light output: >70% at 2 secs, >85% at 3 secs

Input turn on: 8 V and above 

Input turn off: Below 7 V 

Steady State Input Voltage:7~20 V

Max in Rush Current: 15 A at 50ms, 8 A at 2sec; decreasing to steady state within 30 secs

Steady state output volts: 85V±17V

Striking voltage: 23,000V

Max steady state input power:45W (9 to 16V)

Conducted EMI susceptibility:S95/54/EC 

Conducted EMI emission: S95/54/EC 

Efficiency: over 90% during steady status

Radiated EMI susceptibility:S95/54/EC

Radiated EMI emissions: S95/54/EC

Cooling: air cooled

Output wave form: 240±25 Hz square wave

Steady state output power: 35W±2W

Maximum output current: 8 A initial lamps on, 3A next 2 secs

Maximum output power: 80W±17W

Flickering: no flickering during steady status

 

Performances:

Waterproof: Accord with DIN 40050 Standard.

Dustproof: Accord with SAE J575 Standard.

Shockproof: Accord with DIN 40046 Standard.

Reverse voltage protection: No damage against ballasts and bulbs will be caused by reverse connection.

Protection of Short Circuit: Lock protection against continuous or long-time short circuit.

Protection of Open circuit: Lock protection in 0.7s after Open circuit.

Open lamp circuit protection: latch off after 1 second

High voltage test: GND: 500Vdc/1 min/≤10mA

Isolated resistance: GND ≥ 100MΩ

 

1. Important components are all imported from Japan, Germany and the United States.

2. Each ballast has been strictly tested for compatibility,they all run stable.

3.The wiring is made of silica gel material and it is waterproof,fireproof, anti-high temperature, anti-high voltage and anti-erode.

4.Low starting current, only need 6.5 Amps, which lowers down thestarting power so as to extend the lifespan of bulb and wiring.

5. The crust of ballast is made of aluminum alloy, small in size and fast in heat output.

Send your message to this supplier

Enter between 20 to 3,000 characters, English only.
http://en.gasgoo.com/new/common/contactsupplier.aspx?type=4&id=1039024