Product Attribute:
Material :Aluminum
Process:Hard Brazing
Inlet Diameter:25.5mm
Outlet Diameter:25.5mm
Size:332 * 348 * 16 / 26mm
Certification:ISO9001
G.W:1 / 1.4kg
OEM:17700-A78b00-000
Tank Size:46 / 46 * 366 mm
at / Mt:Mt
Thickness:16 / 26 mm
Cartype:Daewoo Tico
Manufacturer Part Number:Kj - 11048 - PA16 / 26
Core Size:332 * 348 * 16/26 mm
Applicationt:
DAEWOO
Production Description:
OEM 17700 - A78B00 - 000 Daewoo Aluminum Radiator for DAEWOO TICO MT PA
Detailed Product Description
Manufacturer Part Number : KJ - 11048 - PA16 / 26
Core Size : PA 332 * 348 * 16 / 26 mm
Tank Size : 46 / 46 * 366 mm
Carton Size : 420 * 105 * 475 mm
Quality Control : ISO9001 : 2000 , TS16949 certification
Warranty : 12 months
Other kinds of Radiator
KJ - 12318A - PA16 |
Toyota HILUX RN85 / RN130 ' 84 - 90 |
PA16 / MT |
KJ - 21067A - PA16 / 22 / 26 |
Hyundai TUCSON ' 04 |
PA16 / 22 / 26 AT |
KJ - 18019A - PA16 / 26 |
Suzuki VITARA ' 88 - 97 TA01 G16A |
PA16 / 26 AT |
KJ - 14094 - PA16 / 26 / 32 / 36 |
Mitsubishi PICKUP L200 ' 98 |
PA16 / 26 / 32 / 36 MT |
KJ - 50012 - PA16 / 22 / 26 |
Peugeot 307 |
PA16 / 22 / 26 MT |
Choose Us Do Not Hesitate:
1) Design term : We have professional design team that has excellent technique .
2) Professional factory : We are manufacturer, specializing in manufacturing heat exchangers.
3) Our service : We can provide OEM & ODM service according to your needs.
4) Rapid response to your needs :We will reply within 24 hours after receiving you letter.
If you have urgent thing,welcome to call us.
5) Wide user : We has exported to many countries, such as Korea, USA, German, etc.
Use&Maintain
1. Radiator should not contact with any acid , alkali or other corrosive properties .
2. It is recommended to use soft water, hard water softening treatment after use ,
avoid to cause the radiator internal blockage and scale production .
3. In the process of installation radiator, please don't damage the scattered tropical (film) and the radiator, bruised to ensure the cooling capacity and seal .
4. Radiators, water to water injection in full, on the water to the engine cylinder body of the switch is turned on , the water out , again close , so as to avoid blisters .
5. Check the water level in the day to day use , to cool down after adding water to add it , slowly open the tank cover , homework personnel should as far as possible away from the body filler , in case of high pressure steam caused by jets of water mouth burns .
More information about us
Please feel free to contact us for any question! Join us, this is a new beginning of the journey , you will feel the most efficient service, best quality and excellent reputation.
Thanks.