Product Attribute:
Supply Ability:500000 Piece/Pieces per Month
Delivery Details:45 days after the prepayment
Production Description:
Product Description
Multi-Copper Series: The main materials of this series is the composite cloth which is made up of common medium-alkali (non-alkali) glass fiber yarn, blend fiber, and four to seven 0.19 copper wires. The imported Butadiene Styrene Rubber 1502, high decomposition temperature Phenolic Resin, and the Friction Performance Modifier also are the main materials.
This series products follow the traditional rubber impregnation technology, because of the high content of the copper wire, the mechanical strength and abrasive resistance of this product have been improved significantly. They can be applied to all kinds of trucks, especially for the heavy trucks. And they can increase the service life of the clutch greatly.
The mainly products are: LH109, LH189, LH706, LH806, etc.
The Main Performance Index:
1,Density: 2.00±0.1g/cm2.
2,Hardess: HRL40-90
3,Bending Strength≥50(N/mm2),Maximum Strain≥15(10-3mm/mm).
4,Friction and Wear Properties meet the demand of the below table:
|
Temperature鈩?/span>
|
100
|
150
|
200
|
250
|
300
|
More 100
|
|
Friction Coefficient (μ)
|
0.45±0.07
|
0.45±0.08
|
0.45±0.09
|
0.45±0.10
|
0.45±0.11
|
0.45±0.07
|
|
Wear Rate(ν)
10-7cm3/(N·m)
|
≤0.15
|
≤0.20
|
≤0.25
|
≤0.28
|
≤0.32
|
/
|
Company Information
Establiahed in November 2011, Yanggu Lihong Auto Parts Co., Ltd is the private owned limited liability company which is located on the Dingji Village, Shouzhang Town, Yanggu County, Shandong Province.
Our company works on the production and sales of clutch facings, we export and import business of our own merchandises. The registered trademark of our products is “Lihong”.
Our main raw materials are: Kevlar Fabric, Copper Free High Twist Fabric, Fiberglass-15, FXB Double Red Copper, FXB Copper Free, Purple Gold Copper Cloth, Butyl Benzene Grain, Resin, Iron Oxide Yellow, Barium Sulfate, Feldspar Powder, Kaolin, Zinc Stearate, Graphite, etc.
Our clutch facings mainly include Kevlar type, Glass Fiber type, Covering Yarn type, Polycrystal Copper type. The advantage of the Kevlar type clutch facing is the high performance Kevlar sloved the problem that the clutch facings’ friction coefficient declined sharply in the high temperature (300鈩? moment. And the low hardness of the Kevlard fiber can make the clutch facing very soft, also can make the cluth smooth and steady, with no harm to the pressure plate and the flywheel mating plate.
Our company is planing to manufacture 5 million clutch facings in 2015, our sales voluem would be more than 50 million RMB then. And our main part of the new factory plant has already completed.
FAQ
Some notes when you inquiry:
Please offer the following information because of the clutch facings’ special characteristics:
1. outer diameter * inner diameter*thickness-number of slots ( for example: 430*230*3.6-18) etc.
2. The vehicle types: ( for example: cars, light truck, heavy truck, machineshop truck, machinery, etc).
3. If you need to drill holes, please offer us the standard drawings or samples.
The mailing address for samples: YANGGU LIHONG AUTO PARTS CO., LTD, Liaocheng City, Shandong Province, China
Contact Supplier