Product List

Material: GCr15 bearing steel, HRC 60-65; All inch series and metric series available; Working Lift: accroding to ISO9001.

Blocks with spherical ball bearings from the two sides sealed with ball bearings and mint (or stamped steel) component housings. Ball bearing the internal structure and the same deep groove ball bearings, bearing such relief in the inner circle. Cut ...

Tapered roller bearings mainly burden the joint load from radial and shaft side. This kind of bearings has strong load capability. It belongs to separated bearing; its inner components and outer components can be equipped individually.On small and ...

As their rollers linearly come into contact with inner ring and outer ring with less coefficient of friction, these bearings have very good capacity of radial load.Cylindrical Roller Bearings Features : 1) Separable2) As the roller linearly comes ...

The tapered roller bearings are mainly suitable for supporting the combination load in radial and axial directions.

This kind bearing unit is a combination of a radial ball bearings, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes. The outer surface of the bearing and the internal surface of the housing are spherical, ...

We can supply pillow block ball bearings with cast iron housing :UCP201~218 and with ductile iron housing UCP201~UCP208.

Angular contact ball bearing features: 1) Our angular contact ball bearings include three big categories: single row angular contact ball bearings, three-point-contact and four-point-contact ball bearings and double row angular contact ball bearings ...

Specifications: 1) Used to bear axial loads, but cannot bear radial loads 2) Seat circle is level or spherical pattern 3) Supplements initial angle and aims at error 4) Can only handle loads in the axial direction 5)Different sizes available 6) ...

This kind bearing unit is a combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes. The outer surface of the bearing and the internal surface of the housing are spherical, so ...