Product Attribute:
Length:20cm
Width:18cm
Height:16cm
Applicationt:
UNIVERSAL CARS
Production Description:
AUTO AC COMPRESSOR FOR 508 8390 With 2pk Pulley
TERNINALS: BULLET.
GAUGE LINE(MM):39.55
BODE TYPE:STD
REFRIGERANT: R-12
MOUNTING/EAR CUT: EM
LUBRICANTS-TYPE: 5GS
LUBRICANT(CC) : 175
C/V LOCATION(S/D):H/H
CYLINDER HEAD-MODEL: B
CYLINDER HEAD TYPE: V-FLARE
DISPLACEMENT/RPM(CC) :138
MAX.ALLOWABLE R.P.M:7000
MAX.CONTINIOUS R.P.M: 6000
N.WEIGHT W/CLUTCH(KG) :7.6
We are the professional auto air conditioner parts supplier located in Guangzhou, China.
If you have any confuse, we will be obliged if you kindly let us know.
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced