Typical Clients:
Volkswagen, The joint electronic, Sumitomo
Production Description:
1 `hinge door parts class, most of the size 80MM * 150MM, 3.0MM thickness of about tonnage of 320 tons, mostly red cut form a continuous 3D model
2 `arm around the steel core classes, most of the size 30MM * 170MM, 3.5MM thickness of about tonnage of 200 tons, the product can be twisted 90 degrees, mostly for continuous mode
3 `pieces of the front cover cover classes, more general processes, there is bending, shaping, twisting, cutting, punching, red edges, etc., to tonnage of 200 tons to 110 tons, the thickness of approximately 2.5MM, size 280MM * Inter-80MM
4 `Bracket, the general tonnage of 200 tons, the product size 70MM * 30MM, the thickness of 4.0MM or so, mostly for continuous mode
5 `terminal block type, the general tonnage of 60 tons, product size 35MM * 30MM, the thickness of 0.5MM or so, mostly for continuous mode
Most products punching, drawing, flanging, bending and other molding process. On the thickness 0.8 ~ ~ 3MM conventional mature parts production capacity, particularly in the 3 ~ ~ 6MM thickness between the development of production, strong technical force. Anklets class, before and after the cover type, stand type, terminal blocks, motor board, the tonnage in the 16 ~ ~ 400T, the size of rooms in 5 * 400MM. According to customer's request non-standard design, comprehensive test of the excellent performance product. For various high profile vehicles. Carton packaging products can also be packaged according to customer special requirements for packaging methods.