Applicationt:
auto
Production Description:
KTLU Vortex Flowmeters can be widely used to measure volumetric flow of overheated & saturated steam, compressed air & general gas, water and liquid etc.
Technical Features:
No moving parts, high reliability and durability
Convenient installation and maintenance
Sensor not connect with the measured fluids directly, stable performance and long service life
Output pulse signal is directly proportional to flow rate, high accuracy and no zero drift
Wide measuring range, turndown ratio 10:1
Low pressure loss, low cost
Frequency output not affected by the fluid change in physical character and composition, meter factor (K) only considers shape and dimension of eddies. Measurement of volumetric flow can get compensation once it needs. Then no re-calibration meter factor needed if damaged parts be exchanged
Wide application for steam, gas, liquid
Technical Specifications:
Size: DN15 ~ DN500
Medium: Liquid / Saturaed steam, Superheated steam / Air / gas
Accuracy: ±1.0% for liquids, ±1.5% for gas / ±2.5% for inserted
Repeatability: ±0.33% for liquids, ±0.5% for gas / ±0.83% for inserted
Rated Pressure: 1.6MPa, 2.5MPa, 4.0MPa, 6.4MPa
Signal Output: Pulse Output, 4~20mA Current Output, RS-485, Hart, ModBus
Power Supply: 24VDC / 3.6V Lithium Battery / Double Power Supply (24VDC & 3.6V Lithium Battery)
Installation Type: Wafer Type / Fixed Inserted / Adjustable Inserted / Adjustable Inserted (with ball valve)
Protection Grade: IP65
Explosion Proof: Exd IIB T4 / Ex ia IIC T4
Fluid Temperature: -40 ~ +250oC (standard) / +100~ +350oC (high temperature)
KTLU Vortex Flowmeters
High accuracy
Simple structure
Long service life
Wide application