Brake DISC

Applicationt: 

Auto

Production Description:

brake disc

1. REMOVE ALL BURRS & SHARP EDGES  THAT WOULD BE DETRIMENTAL TO FIT,  FUNCTION OR SAFE HANDLING.
2.STATIC BALANCE WITHIN 108g.cm.

3. LATERAL RUNOUT MUST NOT EXCEED 0.15 T.I.R. AND MAXIMUM. RATE OF CHANGE NOT TO EXCEED 0.03 IN 30° .
4. TOTAL CIRCUMFERENTIAL THICKNESS VARIATION AT   ANY RADIUS MUST NOT EXCEED 0.018 IN 360°.
5. PARALLEL TO SURFACE -A- WITHIN 0.08 T.I.R.

brake disc
The most common type of disc brake on modern cars is the single-piston floating caliper.