Incline Knurl Nut

Product Attribute:

Material:Stainless steel

Applicationt: 

universal

Production Description:

Characteristics:
1. Treatment of thin sheet.
Install these nuts on sheet with thickness of no less than 0.6mm.
2.   Materials which is difficult to joint with.
These nuts can be used on steel materials which is hard to joint with, and also on materials such as aluminum, stainless steel and plastics.
3.  High installing strength
The part under head has its unique shape, when it is pressed in, the materials are fixed, and higher installation strength is obtained.
4. Easy installation
5. No need for special tooling, air pressure and hydraulic pressure would be enough for simple installation.
6. The opposite side of nut is flat while the surface is not.
7. Still can be used after surface treatment.

 

Materials
Sizes
Surface treatment
Steel
M2 M2.5 M2.6 M3 M4 M5 M6 M8 M10 M12 M16 M20
Cementite(smooth)plating
Stainless Steel
M2.6 M3 M4 M5 M6 M8
 Brass
M3 M4 M5

  

 

 

JIKNS incline knurl nuts are installed in sheet materials which are difficult to joint.The method is easy to apply.