Valve

Product Description Flange Globe Valve Nickel-Aluminum Bronze Valve C95800 300lb flange globe valve: Product range: 1. Size: NPS 2"~60" 2. Presure rating: Class 300 3. Body material; Nickel-Aluminum Bronze C95800 4. Working ...

Specification: 1) Design: ASME B 16.34, BS 1873 2) Face to face: ASME B 16.10 3) Flanged ends: ASME B 16.5 4) Test and inspection: API 6D Body material: TA1, TA2, TA10, TC4, Gr2, Gr3, Gr5 Pressure rating: PN1.0MPa~PN6.4 MPa, Class150~300 ...

Two-piece flanged end ball valve,is available in size 1-12class 150 and 300.The TA Series valve offers versatility,performance and reliability at a reasonable cost.This versatile valve offers various seat options to suit specific service ...

Gate Valve The sluice valves of the company have the following advantages and characteristics: 1. The product is designed by using I-Deas, the advanced computer software purchased from SDRC to conduct three-dimension design and finite-element ...

Features Of V.PORT BALL VALVE 1. The V.Port Ball Valve has all the benefits of CSM Ball Valves. It is easy to adjust the flow rate by angle opening. 2. The V.Port Ball Valve of CSM offers high ...

Specification: 1) Design: API 6D 2) Face to face: ASME B 16.10 3) Flanged ends: ASME B 16.5 4) Test and inspection: API 6D Material: Body& Bonnet: TA1, TA2, TA10, TC4, Gr2, Gr3, Gr5 Pressure rating: PN1.0MPa~PN10.0MPa, Class150~600 ...

Features Of Metal Seat Ball Valve 1. CSM s metal seat ball valves are precisely manufactured by special technique (DVA45) for high temperature/pressure and abrasive conditions. 2. They offer outstanding ...

Casting Valve : Ball valve, Gate valve, Globe valve, Check valve Special Valve : Ball valve with Actuator, 3-way ball valves, Thru Conduit Gate valve, Big size valve, Threaded Ball valve Other Valves : Control valves, Plug ...

THE BLIND FLANGE is a flanges without a bore. It is used to close off the ends of a piping system and/or pressure vessel opening. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened. group. ...

The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersetion of the bore and flange face. This radius is necessary to have the flange accommodate a lap joint sutb end. Normally, a lap joint flange and ...