Product List

Casting Valve : Ball valve, Gate valve, Globe valve, Check valve Special Valve : Ball valve with Actuator, 3-way ball valves, Thru Conduit Gate valve, Big size valve, Threaded Ball valve Other Valves : Control valves, Plug ...

Welding Neck Flanges THE WELDING NECK FLANGE is normally referred to as the "high hub" flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange. The welding neck flanges is ...

THE SLIP-ON FLANGE has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-On flanges are all bored slightly larger than the outside diameter of ...

THE BLIND FLANGE is a flanges without a bore. It is used to close off the ends of a piping system and/or pressure vessel opening. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened. group. ...

The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersetion of the bore and flange face. This radius is necessary to have the flange accommodate a lap joint sutb end. Normally, a lap joint flange and ...

The threaded flange is similar to the slip-on flange, but the bore is threaded. Its cheif merit is that it can be assembled without welding, explaning its use in low pressure services at ordinary atmospheric temperatures, and in highly explosive ...

The socket welding flange is similar to a slip-on flange except it has a bore and a counterbore dimension. The counterbore is slightly larger than the O.D. of the matching pipe, allowing the pipe to be inserted into the flange similar to a slip-on ...

titanium flange China huaxia special metal limited is one of the Chinese professional Titanium Mill Products manufacturers with Foreign Trade Dept.located in China. The titanium mill products we supply are certified to American,British ...

Item name Titanium flange Standard ASME/ANSI B16.5,DIN2630~2633,BS etc Material Gr1,Gr2,Gr5,Gr7,Gr9,Gr12 Size 1/2 ~80 (DN10~600) Pressure rating 0.6~32Mp (DIN)PN6,PN10,PN16,PN25 though PN250 (ASNI) ...

1. Type : Titanium flange 2. Standards: ASTM B381 ASTMB348 ASME SB348 ASTMF136 AMS 4928 3 .Material Grade:GR1 GR2 GR3 GR4 GR5 6AL4VELI 4.Certification ISO9001:2000 5. Applicationschemical industry ,aerospace, spaceflight , surgical ...