Product Attribute:
Output Power:80kw
Length:650mm
Width:520mm
Height:1100mm
Output voltage:380V
Output current:130A
Applicationt: 
suitable all auto parts, such us shaft, gear, camshaft, connecting rod etc.
Production Description:
Made In China High Frequency Melting Equipment
Main characteristics of High Frequency Melting Equipment
1. Light weight, small size, clear designing
2. MOSFET invertor technology, high-efficient conversion
3. Modular designing, ease of maintaining and repairing
4. Environmental protection,easy operation, low labor intensity
5. Perfect protecting function to over temperature, over current, over/low voltage,
water shortage,phase failure etc.
6. Low operating cost, heating rapidly and evenly
7. High power factor over 0.95
8. Energy saving 15%-30% , compared to SCR technology
9. High efficiency over 90%
10. Duty cycle 100%
11. Be started up 100% at any load and any time
12. Can equipped with infrared temperature detecting system(optional)
13. Can equipped with water cooling system(optional)
14. Can equipped with PLC controlling equipment(optional)
Application of the High Frequency Melting Equipment
Mainly used in melting steel and stainless steel,copper,gold,silver,aluminum, all kinds of non-ferrous metals and so on.
Main specifications and heating capacity:
The melting time is about 50-60min for clod furnace and 20-30min for hot furnace.
Melting furnace model |
Steel and stainless steel |
Copper,gold,silver |
Aluminum |
30KW |
2kg |
10kg
|
3kg |
40KW
|
5kg
|
20kg
|
6kg
|
50KW
|
10kg
|
30kg
|
10kg |
60KW
|
18kg
|
50kg
|
20kg |
80KW |
25kg
|
100kg |
30kg |
120KW |
50kg
|
150kg
|
50kg
|
160KW
|
100kg |
250kg |
100kg |
For spline shaft , usually use 80kw can meet your demands.
for gear,different diameter,different power.
WH-VI-80 technical parameter of High Frequency Melting Equipmen:
Model |
WH-VI-80 |
Worker power |
Three phase 380V/50Hz |
Working voltage range (AC) |
342V~430V |
Max input current |
130A |
Max output power |
80KVA |
Oscillation frequency |
10-35KHz |
Continuous load rate |
100% |
Cooling water pressure |
0.1-0.3mpa |
Generator weight |
80kg±5% |
Transformer weight |
77kg±5% |
Generator dimensions(L*W*H)mm |
650*520*1100 |
Transformer dimensions (L*W*H)mm |
500*800*580 |
Particular recommended |
Gear quenching, work piece forging, blank |
Temperature protection |
50degrees |