Product Attribute:
Applicationt:
Ford
Production Description:
i. Touching Operation
For the safe and convenient switching function in driving, the operation can be reached by touching the instruments aluminum ring. The functions
change from up to down orderly with continuous cycle. Touching functions can open\close by remote control buttons. More details will be shown in
subsequent.
ii. Remote Control Buttons
To ensure safety, please do operations when the car is stationary. Remote control buttons include functional buttons,
operational buttons and special buttons
* Operational Buttons
Including some buttons like UP/DOWN, LEFT/RIGHT, OK, ESC. When the instrument works normally, UP/DOWN is used for switching
working mode continuously. In and , the double-colored indicator location, LEFT/RIGHT can be used to switch corresponding
function. OK stands for confirming operation. ESC stands for exiting operation.
* Functional Buttons
stands for setting touching functions with open/close, with a "drop "prompt indicates open touching function, with two " drop " indicates close touching function. The factory setting is open-touching function. when the pointer points to zero point, there will some skewing because that the
instrument may be plucked up when it works, so when the instrument works normally, press this button to enter into zero flow. When entering into flow,
pointer points to the -100 automatically. According to the relative skewing, the pointer can move to the left or right directions by UP/DOWN keys. when it points to -100 completely, press OK button, zero setting ended. The two keys are used to set alarm threshold, MAX for maximum, MIN
for minimum. When the instrument works normally, press this button to set threshold value of alarming, adjust the rang of threshold value by UP/DOWN keys, press OK to save, and then exit. is used to set the speed communicating with the car. In order to be compatible with different OBD
corresponding speed models, this system has three corresponding speed levels. Press this button to switch between lever 1 (fast), lever2 (middle), lever3 (low), the buzzer can make corresponding prompt di di di di di di at the same time. The factory is set to lever 1. There isn
t definition for this product for the time being.
* Specific Buttons
According to different products, they have specific functions. More details will be shown in subsequent.
iii. 0-100MPH Accelerating test
The instrument can test accelerating time of 0-100MPH, when the car stops (the speed must be zero), press k1, the pointer
points to zero automatically, indicator light completely destroyed to prompt the accelerating test begins. After the car
moves, it accelerating continually, the instrument shows the current speed value. When it reaches 100k\h, it will make a
sound di and shows 0-100MPH accelerating time, automatically, the units is 0.1s.Due to the maximum test time is 20s, so
if it doesnt accelerate to 100k\h, the pointer will point back to zero, waiting for next test. When the test is completed,
press k1 for another test and press OK/ESC to exit this model.
iv. Clear fault codes