Street Address: No. 6 Fangyuan Road
City: Nanjing
Province: Jiangsu
Country/Region: China
123
Replacement Garage Door Remote If you need to replace a lost or broken remote control, or just want to complement your existing garage access system, the new Remote-Master compatible remote control is the perfect solution. It is designed to work with garage door openers manufactured by Chamberlain Group to give you convenient, secure, access to your garage and home. Compatible with ALL Security+ systems, including Chamberlain, Sears Craftsman and LiftMaster that have a RED or ORANGE Learn/Smart Button. It's a simple solution to your lost or damaged remote control. Easy to Program 1. Press and release the "learn" button on the motor unit. The learn indicator light will glow steadily for 30 seconds. 2. Within 30 seconds, press and hold the button on the hand-held remote. 3. Release the button when the motor unit light blinks. It has learned the code. To Erase All Codes From Motor Unit Memory To deactivate any unwanted remote, first erase all codes. Press and hold the "learn" button on motor unit until the learn indicator light goes out (approximately 6 seconds). All previous codes are now erased. Reprogram each remote or keyless entry you wish to use. To Control the Opener Lights A remote push button can be programmed to operate the opener lights without opening the door. 1. With the door closed, press and hold the remote button that you want to control the light. 2. Press and hold the Light button on the door control. 3. Press and hold the Lock button on the door control. 4. After the opener lights flash, release all buttons. Test by pressing the remote push button. The opener lights should turn on or off but the door should not move. Open/Close/Stop Operation Remote control can be programmed to operate one door using all 3 buttons: the large button will only open the door, the middle button will close the door, and the third button will stop the door's movement. You may set up this feature as follows: 1. With the door closed, press and hold the large remote push button. 2. Press and hold the Lock button on the door control. 3. Press and hold the door control push bar. When the opener lights flash, release all buttons. Test by pressing the large (Open) button on the remote. The door should open. Press it again while the door is open and nothing should happen. Press the middle (Close) button while the door is moving and it should close. Press the third (Stop) button and the door should stop immediately. The Remote Control Batteries The lithium batteries should produce power for up to 5 years. To replace, pry open case with visor clip or screwdriver, as shown. Insert batteries positive side up (+). Dispose of old batteries properly. The RemoteMaster is backed by a one-year manufacturer's limited warranty. What's in the Box RemoteMaster transmitter, one coin cell battery, one visor and instructions.