James Walker Springsele & Teesele- Serving The Oil & Gas Industry

Product Attribute:

Material: Rubber

Standard or Nonstandard:Standard

Applicationt: 

dus auto

Production Description:

James walker Springsele & Teesele-Serving the oil & gas industry
 
Teesele is capable of operating in a dynamic mode,
whereas Springsele is recommended for static duties only and is capable of sealing under higher pressures with larger extrusion gaps.
 
Both seal types are double acting, and will effectively seal arrangements that are subjected to:
_ Extremes of pressure/temperature.
_ Attack by oilfield media where an O
ring cannot survive the maintenance free life cycle of the equipment.
 
James walker Springsele & Teesele Materials:
The standard elastomers used for both Springsele® and Teesele® are:
 
Elast-O-Lion 101 Hydrogenated nitrile (HNBR/HSN). This elastomer provides high mechanical strength and wearresistant properties. It has good resistance to many oilfield chemicals including H2S and amine corrosion
inhibitors. It is also resistant to explosive decompression and is approved to many ED specifications.
The materials of construction dictatetemperature capability in air, as follows:
Min operating temp: 10°F (24°C)
Max operating temp: +320°F (+160°C)
Note: short excursions to +350°F
(+178°C) can be sustained.
 
FR58/90 Fluoroelastomer: Viton® B (FKM). This has excellent chemical and thermal properties, and is ED resistant in hydrocarbon applications. It is approved and specified by many oil producers and equipment manufacturers.
The materials of construction dictatetemperature capability in air, as follows:
Min operating temp: Min operating temp: +15°F (10°C)
Max operating temp: +410°F (+210°C)
 
 
James walker Springsele & Teesele Typical applications:
These seals are used for many oil and gas duties, including:
_ Down-hole
_ Wellhead
_ Surface equipment
_ Valves and high-pressure pipelines especially where the use of O rings is precluded.
Both Springsele and Teesele can be:
_ Fitted at original equipment stage.
_ Retrofitted in any existing housing
designed for O rings with back-up
rings.
_ Custom designed and manufactured to fit non-standard housings.
 
To suit grooves that satisfy all the dimensional requirements of SAE AS568A and BS1806
 
HOUSING DIMENSIONS
       Inch  mm
     D    C   D   C
104 0.313 0.125 7.94 3.18
105 0.344 0.156 8.74 3.96
106 0.375 0.188 9.53 4.76
107 0.406 0.219 10.31 5.56
108 0.438 0.250 11.11 6.35
109 0.500 0.313 12.70 7.94
110 0.563 0.375 14.29 9.53
111 0.625 0.438 15.88 11.11
112 0.688 0.500 17.46 12.70
113 0.750 0.563 19.05 14.29
114 0.813 0.625 20.64 15.88
115 0.875 0.688 22.23 17.46
116 0.938 0.750 23.81 19.05
117 1.000 0.813 25.40 20.64
118 1.063 0.875 26.99 22.23
119 1.125 0.938 28.58 23.81
120 1.188 1.000 30.16 25.40
121 1.250 1.063 31.75 26.99
122 1.313 1.125 33.34 28.58
123 1.375 1.188 34.93 30.16
124 1.438 1.250 36.51 31.75
125 1.500 1.313 38.10 33.34
126 1.563 1.375 39.69 34.93
127 1.625 1.438 41.28 36.51
128 1.688 1.500 42.86 38.10
129 1.750 1.563 44.45 39.69
832 2.313 2.063 58.74 52.39

More detalis please visit walleseals.