[Sep 28, 2014]
 |
500°F/260°C Continuous Exposure: Higher Intermittent
BSTFLEX FIRE SLEEVE
BSTFLEX FIRE SLEEVE is disgned to protect hoses,wires and cables from the hazards of high heat and occasional flame.
BSTFLEX FIRE SLEEVE protects continuously to 260°C/500°F and will withstand a molten splash at 1200°C/2200°F.Made of knitted fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.
Resistant to hydraulic fluids,Iubricating oils,and fuels,Slicone Sleeve insulates against energy loss in piping and hosing;protects employees from burns;and allows bunding of wires,hoses,and cables.
BSTFLEX FIRE SLEEVE is the perfect cover to protect hydraulic hoses,pneumatic lines and wiring bundles.
BSTFLEX FIRE SLEEVE can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). |
|---|
[Sep 28, 2014]
|
500°F / 260°C Continuous Exposure: Higher Intermittent
Removable Insulation Blanket
If wear and exposures are part of the problem, we can custom design Removable Insulation Blanket covers to handle the harshest conditions.
Heat insulation alone may not be your solution.
Requirements for thermal performance are often accompanied by the need to solve issues of abrasion, oil, moisture, vibration and flexibility.
Our solutions combine the physical and thermal properties of 17 oz or 32 oz fire blanket and fiberglass / silica / ceramic internal insulation to create custom removable insulation covers for the most hazardous and severe environments. |
|---|
[Sep 28, 2014]
|
Carbon Fiber Braided Sleeve can be slid over a release coated tube or mandrel and used to create very strong and cosmetically attractive tubes and sections.
Carbon Fiber Braided Sleeve can be expanded or contracted to accommodate a range of diameters. Each sleeve can be expanded by up to 30% and contracted by up to 70% of the stated diameter.
Braided sleeves are extremely resistant to cracks between layers, reducing the possibility of delaminating and increasing the strength of the product. When inflated, braided reinforcement works much like a shark's body, orienting itself to the direction of force. This actually strengthens its outer skin, enabling it to withstand pressure and carry load, and to tolerate damage and fatigue. If a puncture does occur, the sleeve provides a slow, controlled failure, rather than a more damaging and potentially dangerous blowup. |
|---|
[Sep 28, 2014]
|
Heat, flame and weld spatter protection, designed to exceed industrial standards where resistance to moisture, sunlight, corona and hydraulic oils is needed.
0.8 mm high temperature resistant fabric (32oz/yd2; 1085g/m2) constructed from a glass fiber base fabric, impregnated both sides with a specially compounded silicone rubber coating designed to shed heavy weld spatter and resist heat and occasional flame.
0.8 mm high temperature resistant fabric is completely impervious to water, moisture, hydraulic oils. It is used primarily for fabrication of premium grade valve insulation covers, hanging flame-protection blankets in outdoor and offshore use, and protective molten splash applications. |
|---|
[Sep 28, 2014]
|
500°F/260°C Continuous Exposure: Higher Intermittent
96 OZ Silicone Coated Fiberglass Blanket
Ultra-heavy grade, high temperature resistant fabric, designed for use in severe molten splash applications in the primary metals industry.
Tough, durable and very versatile
Our heavy weight 96 OZ Silicone Coated Fiberglass Blanket (3260 g/m2) is constructed from a glass fiber base fabric, coated one side only with a very thick layer of specially compounded silicone rubber that sheds molten splash almost instantly, before heat transfer can occur.
High temperature, heat and flame resistant 96 OZ Silicone Coated Fiberglass Blanket is the perfect choice for protecting a variety of hoses, lines, wires, cables and equipment assemblies such as electronic enclosures, valves, robotic arm and elbow protection, etc., from exposure to high and extreme heat conditions. |
|---|
[Sep 28, 2014]
|
500°F/260°C Continuous Exposure: Higher Intermittent
2 mm silicone rubber fiberglass cloth
Ultra-heavy grade, high temperature resistant fabric, designed for use in severe molten splash applications in the primary metals industry.
Tough, durable and very versatile
2 mm silicone rubber fiberglass cloth (2600 g/m2) is constructed from a glass fiber base fabric, coated one side only with a very thick layer of specially compounded silicone rubber that sheds molten splash almost instantly, before heat transfer can occur. |
|---|
|