Product Attribute:
Input Voltage:250v
OutputVoltage:250v
Current:16A
Resistive:50Ω
Applicationt:
Acura, Bugatti, cadillac, DADI Auto, Foton, Gonow, Honda, Porsche, Shuanghuan, Zhongxing
Production Description:
Technical parameters:
1.Electrical parameters:1)CQC,VDE,UL,CUL AC250V 50~60Hz 5A/10A/15A(Resistance load)
2)UL AC125V 50Hz 15A (Resistance load
2.Action temperature range: -10~260(Optional); temperature accuracy: ±2 ±3 ±5 ±10
3.Recovery and action temperature difference: 8~100(Optional)
4.Connection method: Insert the terminal 250# (bending angle: 0~90° optional); Insert the terminal 187# (bending angle: 0~90° optional; thickness: 0.5, 0.8mm optional)
5.Lifespan: 100,000 times
6.Electrical strength:No spark or breakdown for 1min at AC 50Hz 1800V
7.Contact resistance: 50m
8.Insulation resistance: 100M
9.Junction method: Constant-closed: the contact point disconnects when temperature rises; and contact point connects when temperature falls;
Constant-opened: the contact point connects when temperature rises; and contact point disconnects when temperature falls.
10.Casing protective class: IP00
11.Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device.
12.Installation method: installed for KI031 series: general moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole
Description:
-
It is close until the surface reaches 80 Celsius degree and then the switch open. Automatically reset
-
When the surface cools off about 5 degrees, the switch automatically close.
-
Opening-closing durability: 10000 times or more (under rated load).
-
General-purpose low cost, compact, large capacity, minute current thermostat.
-
Application: for Household electric appliances, PC, Microwave ovens, Irons, Refrigerators, Electronic oven, Heating unit, Coffeepot, Water heater, etc.
Structure and application:
KI-31 serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; the contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; open/close the contact point; disconnect/connect the circuit; thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state.
Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat.
Characteristics:
Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radio
Precautions:
1.When adopting contact temperature sensing installation, the surface of the metal cover is required to be securely contacted with the installing surface of the controlled device. For ensuring the temperature sensing effect, it is required to coat thermal conductive grease or other similar thermal conductive medium on the surface of temperature sensor.
2.For reliable performance, collapse, loose or distorted top part of the cover is prohibited during installation.
3.Liquid inleakage into the controller, crackle in the casing and unauthorized change of external terminal position are prohibited
4.When the product is used in the circuit with maximum current of 5A, the cable with copper core at section 0. 5-1mm2 is required for connection; When the product is used in the circuit with maximum current of 10A, the cable with copper core at section 0.75-1.5 mm2 is required for connection;
5.The product should be kept in a clean, dry and corrosive gas-free warehouse with good ventilation and at relative humidity below 90%, environment temperature below 40.
Technical parameters:
1.Electrical parameters:1)CQC,VDE,UL,CUL AC250V 50~60Hz 5A/10A/15A(Resistance load)
2)UL AC125V 50Hz 15A (Resistance load
2.Action temperature range: -10~260centigrade (Optional); temperature accuracy:2/3/5/10centigrade
3.Recovery and action temperature difference: 8~100centigrade (Optional)
4.Connection method: Insert the terminal 250# (bending angle: 0~90 optional); Insert the terminal 187# (bending angle: 0~90 optional; thickness: 0.5, 0.8mm optional)
5.Lifespan:>100,000 times
6.Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V
7.Contact resistance: <50mili Ohm
8.Insulation resistance: <100Mili Ohm
9.Junction method: Constant-closed: the contact point disconnects when temperature rises; and contact point connects when temperature falls;
Constant-opened: the contact point connects when temperature rises; and contact point disconnects when temperature falls.
10.Casing protective class: IP00
11.Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device.
12.Installation method: installed for KI031 series: general moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole
Description:
It is close until the surface reaches 80 Celsius degree and then the switch open. Automatically reset
When the surface cools off about 5 degrees, the switch automatically close.
Opening-closing durability: 10000 times or more (under rated load).
General-purpose low cost, compact, large capacity, minute current thermostat.
Application:
Household electric appliances, PC, Microwave ovens, Irons, Refrigerators, Electronic oven, Heating unit, Coffeepot, Water heater, etc.