Product Attribute:
Voltage:85v
Applicationt:
BYD (Flyer, F3, F3R, F6)
Chery (Eastar, Cowin, QQ, Tiggo, A5, V5, QQ6)
Jinbei (Grace)
JMC (Transit, Buv)
Kia (Cerato, Optima, Rio, Sportage, Soul, Sorento, Opirus, VQ, Borrego, Carens)
Lexus (IS, ES, GS, LX, LS, SC, RX)
MG (MG7, TF, MG3)
Nissan (Tiida, Tenan, Sylphy, Geniss, Livina, Paladin, X-TRAIL, Cefiro, FUGA, CIMA, 350Z, QUEST)
Toyota (Previa, RAV4, Prado, Hiace)
volvo (S40, C30, C70, S80, XC90, XC60)
Xiali (Xiali, Vela, Vizi, Xiali N3)
Zhonghua
JAC
Production Description:
Electric parameter
|
Item |
Parameter |
Remarks |
|
Electric Parameter |
|
>85% |
|
|
|
33-35W |
|
|
|
9V |
|
|
|
9V-18V |
|
|
|
6.0-7.5A |
12V Start-up |
|
|
3.1-3.5A |
12V Input Voltage |
|
|
85V±17V |
|
|
|
<5V |
|
|
|
Work normally,Current:3.1-3.5A |
Low/High Temperature Alternating Chamber |
|
|
Square |
|
|
|
320HZ±5% |
|
|
|
<2.3A |
|
|
|
<0.25A |
|
|
|
400V |
|
|
|
16KV-23KV |
|
|
|
40-60S |
Cool Bulb |
|
|
-40--105 |
|
|
|
-40--125 |
|
Testing item
1. 6 hours continuous working aging test
2. Connection circuit protection test
3. Short circuit protection test
4. Lack of voltage protection test
5. Over voltage protection test
6. Flash light concussion test
7. Quakeproof capability test
8. Cold warm boot test
9. Polarity protection test
10. EMC anti-jamming test Electrical Requirements The ballast must deliver 35 watts to the lamp when the voltage across the lamp is between 70 and 110 volts. When this voltage is lower, the ballast must deliver at least .5 amp but generally no more than 2 amps and preferably as close to 35 watts as possible. Higher currents are preferred - a partially warmed up metal halide lamp sometimes has an unstable arc at lower current.
Most other metal halide lamps require AC. DC is tolerable briefly, and then preferably only if the bulb is cold. DC electric field, hot quartz or hot glass, and salts or alkalis is not a good combination - electrolysis effects can occur which can create weak spots or cracks in the arc tube.