Home » Showroom » » Products » Hid » Jinbei Slim ballast HID xenon kit(EP-F007)
Company Info
Guangzhou Yili Electronics Co. , Ltd Guangzhou Yili Electronics Co. , Ltd

Street Address: Rm1109, Xiangyun Building, No. 1400, Road Baiyundadaobei

City: Guangzhou

Province: Guangdong

Country/Region: China

View Contact Details

Jinbei Slim ballast HID xenon kit(EP-F007)

Jinbei Slim ballast HID xenon kit(EP-F007)

Application:  Jinbei (Grace) Kia (Cerato, ...

Market Type:  After Market

Packing:  color box+carton

Samples:  Charge

Place of origin:  China

Product Attribute:

Voltage:85v

Applicationt: 

Jinbei (Grace)
Kia (Cerato, Optima, Rio, Sportage, Soul, Sorento, Opirus, VQ, Borrego, Carens)
Lexus (IS, ES, GS, LX, LS, SC, RX)
MG (MG7, TF, MG3)
Nissan (Tiida, Tenan, Sylphy, Geniss, Livina, Paladin, X-TRAIL, Cefiro, FUGA, CIMA, 350Z, QUEST)
Toyota (Previa, RAV4, Prado, Hiace, PRADO, Reiz, Corolla, Camry, Sienna)
volvo (S40, C30, C70, S80, XC90, XC60)
Xiali (Xiali, Vela, Vizi, Xiali N3)
Changhe Auto (IDEA)
Hongqi
JAC
Zhonghua

Production Description:

Electric parameter

 

Item Parameter Remarks
Electric Parameter   >83%  
  34-36W  
  9V  
  9V-18V  
  5.0-7.5A 12V Start-up
  3.3-3.7A 12V Input Voltage
  85V±17V  
  <5V  
  Work normally,Current:3.3-3.6A Low/High Temperature Alternating Chamber
  Square  
  320HZ±5%  
  <2.3A  
  <0.25A  
  400V  
  16KV-23KV  
  <120S Cool Bulb
   -40--105  
   -40--125  
Testing item 1.       6 hours continuous working aging test
2.       Connection circuit protection test
3.       Short circuit protection test
4.       Lack of voltage protection test
5.       Over voltage protection test
6.       Flash light concussion test
7.       Quakeproof capability test
8.       Cold warm boot test
9.       Polarity protection test
10.     EMC anti-jamming test Electrical Requirements The ballast must deliver 35 watts to the lamp when the voltage across the lamp is between 70 and 110 volts. When this voltage is lower, the ballast must deliver at least .5 amp but generally no more than 2 amps and preferably as close to 35 watts as possible. Higher currents are preferred - a partially warmed up metal halide lamp sometimes has an unstable arc at lower current.

Most other metal halide lamps require AC. DC is tolerable briefly, and then preferably only if the bulb is cold. DC electric field, hot quartz or hot glass, and salts or alkalis is not a good combination - electrolysis effects can occur which can create weak spots or cracks in the arc tube.


Car Power system requirements It can work under bad weather (rain, snowfall or night time). It can work under water It can work in extreme hot area or cold area such as desert.

Send your message to this supplier

Enter between 20 to 3,000 characters, English only.
http://en.gasgoo.com/new/common/contactsupplier.aspx?type=4&id=1066321