Product List

It is a kind of Changeover Switch, which can be used on EG800(Same As AG) Multipoint Sequential System.

It is a kind of Changeover Switch, which can be used on EG600(Same As LOGAS) Multipoint Sequential System.

It is a kind of Changeover Switch, which can be used on EG500 Multipoint Sequential System and also can be used with D01 emulator.

Product Technical Parameter: 1.E5-D series: Connecting to the Hall pressure gauge (power supply: 12V; transducer output: 0.3-4.5V); 2.Gas volume display: 5-18Mpa; 3.Light P means working oil-use-state; 4.Light A means to chang ...

Product Technical Parameter: 1.Max. Inlet Pressure: 22 MPa 2.Max. outlet pressure: 0.15MPa ~ 0.3MPa 3.Work pressure: 20MPa 4.Operating temperature: 40+ 120 5.Maximum Flow: 50m3/h Remark: There is a High Pressure Valve ...

Product Technical Parameter: Max Inlet pressure: 2.2Mpa Max output pressure: 0.12Mpa Working temperature: --40~+120 Working Medium: LPG Single Point Injection System Max Flow: 16NM3/H

It is a kind of ECU to be used on single injection system(Closed Loop System). WIth good quality and better service.

It is a kind of ECU to be used on single injection system(Closed Loop System). With good quality and better service.

Product Technical Parameter: The injector cut-out Emulator cuts out and simulates the operation of the injectors when the vehicle is running on GAS, thereby preventing the check-engine indicator light from coming on and possible ...

Product Technical Parameter: 1.NPT-G1/4 12V coil with filter 2.Fuel type: lpg liquid/vapor, low pressure natural gas vapor inlet 3.Pressure (Maximum): 315psi (21.72Bar) 4.Flow rating: 105.6GM(24,000 NL/H) @58psi (400kPa)Air ...