Timing Belt Tensioners 1P12810A81400-000 For DAEWOO

Applicationt: 

DAEWOO

Production Description:

Tensioner bearing applies tension to
the drive belt and Prevent Slack;
Idler bearing affect change
in the angle of direction

Tensioner Bearing

1P12810A81400-000

Tensioner Function
It is rotated with a peanut hole as the central figure;
1. Easy install of timing belt
2. Set up initial belt tension with tension spring force
3. It keeps up belt tension after installing on engine
4. Reduce belt span vibration as supporting belt

Idler Bearing

Idler Function
Most of case, It locates tight (right) side;
1. Increase belt wrap angle of cam pulley and crankpulley
2. Reduce belt span vibration as supporting belt
3. It keeps up belt tension after installing on engineldler could be added or removed according to engine layout

This bearing is located in the front of an internal combustion engine. It provides tension to the belt which drives from the crankshaft, to the cam shaft, alternator, air compressor, power steering pump, and water pump. It must handle high temperatures, high-speed rotation, and belt vibration because of contiguity in the engine used in order to make the direction of a belt change. These bearings are designed against different specification from normal deep groove bearings. These bearing are divided roughly into two types and identified by the usage, respectively.

Sealed groove bearing is usually used and it also has built-in heat-resistant grease, a seal, and retainer and the structure can withstand a temperature change or change of belt tension when the car is running.

1)Tensioner bearing
The rotation center is movable in order to give tension to the belt.
2) Idler Bearing
Unitized with the pulley.