Engine Coolant Simulation Corrosion Meter

Product Attribute:

Applicationt: 

Friend

Production Description:

Engine Coolant Simulation Corrosion Meter

Scope of application
 Engine cooling fluid simulation using the corrosion analyzer applicable standards: SH/T0088-91 this instrument to use: the sample under certain temperature and flow conditions in the reservoir, water pump, raditor and rubber tube closed system Cycle 1064h, its corrosion resistance can be provided is designed and made as per the reservoir from the engine cooling system of the typical metal used in the test piece weight loss and visual inspection of each member
within a state of the surface determined. the change in performance of the sample in the test cycle on a regular basis for analysis of a sample taken from the system to determine. the instrument is suitable for the engine coolant concentrate and engine coolant. Instrument adopts imported digital temperature controller, the PID tracking temperature control and high precision.
Function characteristics
1.the engine cooling fluid simulation using the corrosion analyzer using explosion-proof motor and fitted with over temperature protection, storage cover above equipped with safety valve, to ensure the security instrument run.
 
2.Engine coolant analog the corrosion analyzer with piston displacement of 1.6 ~ 5.0L auto water pump and cooling water tank, counter FRIENDs with stainless steel fasteners made of stainless steel screws, easy to disassemble never rust.
3.engine coolant simulation using corrosion analyzer using imported digital temperature controller, the PID tracking temperature control and high precision.
4.engine coolant analog corrosion meter turbine flowmeter sensor measurement accuracy andintuitive.5, engine coolant simulations using corrosion analyzer using intelligent digital timer, accurate timing, the actual running time is displayed after the midway .
 
Technical parameters
1.the liquid flow rate: 1.3 ~ 1.6L / s ;
2.control temperature: 88 °C± 3 °C ;
3.running time: 1064h ;
4 .heating power: 2.6kw  ;
5. motor power: 2.2KW;
6.the pressure directions: 80 ~ 103Kpa;
7. Total Power: 4.8kw;
8.the work of the power supply: AC380V ± 10% 50HZ;
9.Weight: 180Kg.