Applicationt:
Renault
Production Description:
Launch Super
The Tech-2 is the
|
Features and Specifications |
|
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
Features and Specifications |
|
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
Features and Specifications |
|
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
|
Features and Specifications |
|
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|
|
Clip' s main menu allows you to:
- see all the information relating to the vehicle
- look at the function you want to use: - computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter
Renault CAN Clip set includes :
- CAN Clip Interface
- 2 cables for CAN Clip < -> Car connection
- 1 cable for CAN Clip < -> PC connection
- 1 software CD (CLIP v71, can be installed on ANY PC)
It' s very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V. I. N. and press ENTER.
same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
Dimensions 12*6*2
Microprocessor 32 bit, 16 MHz
Memory 32 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications Integral RS232 communication port.
Screen 3. 8*2. 8 backlit monochrome with full graphics
capability: 320?40 pixels. Displays up to 9 vehicle
parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi)
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/ Security features
Data/ Sensor/ Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/ 19 Adapter
NAO 12/ 19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
16 connector
As you are no doubt aware, the Launch X431 system has a number of 16-pin OBD II-style plugs, OBD-16C and CAN 2 are by far the most popular.
Although your X431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time.
The NEW Launch Super 16 connector avoids this by covering the functions of the SMART OBD, OBD-16C, CANBUS II plugs as well as the BMW-16 and TOYOTA-16 plugs.
Additionally the super 16 connector has a double wired CAN bus system allowing additional coverage for new Opel, SAAb and GM vehicles, especailly for the SRS system and some BODY control system.
Also the CITROEN/ PEUGEOT converter required for use with the CAN 2 plug is no longer required with the super16 connector.
|