Street Address: Xiangzhuang Industrial Park, Hexi Town, Linxi County, Hebei Province, China
City: Xingtai
Province: Hebei
Country/Region: China
Number of Row:Double Row
Acura
CHINAQiang Sheng bearing is a professional production of tapered bearings manufacturer: Unified Service Hotline: 0086 15131355021 Professional production specifications :32004 -32020 30202-30218 32205-32218 Inch series tapered roller bearings Specifications: 12.7mm-290.000mm Tapered roller bearings can be separated from the inner ring and roller, cage and outer ring with the composition of the components can be separately Installation. Roller and raceway contact points of the contact line can be modified to reduce stress concentration. Tapered roller bearing can withstand large radial loads and axial loads. The tapered roller bearing axial load can only pass one way, so as to pass in the opposite direction of the axial load will need to install another with symmetrical tapered roller bearings. Tapered roller bearings is the largest amount of single row tapered roller bearings. The front wheel of the car in recent years to spend the small size of the double row tapered roller bearings. Four-row tapered roller bearings used in large-scale cold rolling mill and other heavy machines. Classification of tapered roller bearings Single row tapered roller bearings have a outer ring, the inner ring and a set of tapered roller cover from the basket into a cage inner components. Components can be separated outer and inner ring, tapered roller bearings according to ISO standard dimensions, any one standard model of the tapered roller bearing outer ring or inner components and the same model should be able to outer or inner component and implementation of international exchange. The outer ring of the same model except that the Department of dimensions, tolerances must comply with ISO492 (GB307) provides, the inner components of the cone angle and cone diameter components must also comply with the relevant provisions of the swap. Typically, single row tapered roller bearing outer ring raceway of the cone angle 10 ° ~ 19 ° prior to withstand the bearing loads and radial loads to the combined effects. Angle the greater the axial load capacity are greater. Large cone angle of the bearing, post code plus B, cone angle between 25 ° ~ 29 °, it is subjected to high axial load. In addition, the single row tapered roller bearings can be adjusted during installation, the size of clearance. Double row tapered roller bearing outer ring (or inner) is a whole. Two inner (or outer) face similar small, the middle spacer, clearance by the spacer thickness is adjusted, and can also be used to adjust the thickness of spacer double row tapered roller bearings and preloaded. The use of tapered roller bearings Mobile: 0086 15131355021 Tel: 0086-319-8543518 Fax: 0086-319-8542518 Zip Code: 054901 Address: A West County, Hebei Province, China Zhuang Industrial Zone, Hexi Town, Phase M S N: bearinglei@hotmail.com E-mail: bearinglei@hotmail.com Website: