Shock Switch(Standard) SW-58015P

Applicationt: 

it can be used all kinds of car

Production Description:

shock switch(standard) SW-58015P
 
Function:

1. 
   vibration detecting

 
Applications

1. 
   Alarm device
2. Toys
3. Electronic scale

 
Features:

1. 
   SW-58015P seriesare spring type, no directional vibration sensor trigger switch, any angle can trigger
2. switch is open circuit OFF-state, when it is static, when external force to touch and corresponding vibration, or movement speed achieve adequate (partial) centrifugal force, conductive pick feet will produce instant conductivity is instant ON-state, when external force disappear, switch back to open circuit OFF-state.
3. Switch have the identification P at the bottom, for completely airtight;
4. In the normal,switch life can reach20,0000 cycles lifespan
   1. Trigger standard sensitivity
   2. Switch external for metal, high heat resistance

 
Electrical characteristics:
Voltage: <12V
Current: <20mA
Conductive time: 2ms
Closed resistance: <30 ohm
Open resistance: >10M ohm
 
Mechanical characteristics:
Temperature range: Storage: -40°C to 80°C, Operating: -40°C to 80°C
Pull force of terminal: 300gf for 1 minute
Humidity: 95% RH, 40°C for 96 hours
Operating lifespan: 200,000 cycles
 
Bill of material:
Outer tube: brass wirenickel-plated
Copper tube: brass wire, silver-plated
Spring: Stainless steel, phosphorus copper wire
Sealing glue: epoxy resin
 
Welding characteristics
   Solder tin, tin content 100%
   Welding humidity: 260°C ±10°C
   Welding time: 2-2.5 seconds
Do not use strong acid,alkali flux
 
Packaging: 1000PCS/bag (PVC plastic)
 
 
Note

1. 
   If the product used for high security products and durability of extremely high equipment (such as life safety equipment, aviation facilities, disaster prevention device), please confirm whether a share, can seek advice our company for details
2. In case of fire,Please do not overload applicable,
3. The welding temperature or time more than standard, can cause switch collapse
4. Do not use water solubility flux. May cause damage to the switch
5. Do not use solvent wash switch
6. This switch conduction rate of 98% (conductivity rate per 100 times value switch actions, can good conduction ratio)