Tip-Over Switches SW-106D

Applicationt: 

it can be used in all kinds of car light

Production Description:

Tip-over switchesSW-106D
Function:

1. 
   horizontal tilt detecting
2. vertical flip detecting
3. vibration detecting

 
Applications

1. 
   Digital camera rotate
2. Automotive devices
3. Home electrical appliances
4. Communication devices
5. Toys

 
Features:

1. 
   SW-106D is Ball type tilt vibration induction switch
2. When the product upright or achieve adequate Vibration strength, the products are in ON-state, as the products tilt to any direction and exceed 45degrees, switch will stay in OFF-state.
3. product completelyairtight, waterproof, dustproof
4. in the normal,switch life can reach10,0000 cycles lifespan
5. material compliant with ROSH directive, replace the mercury switch
6. simple for switch signals and circuit , and economic price

 
Electrical characteristics:
Voltage: <12V
Current: <20mA
Conductive time: 2ms
Closed resistance: <10 ohm
Open resistance: >10M ohm
 
Mechanical characteristics:
Temperature range: Operating: -40°C to 80°C
Pull force of terminal: 500gf for 1 minute
Humidity: 95% RH, 40°C for 96 hours
Operating lifespan: 100,000 cycles
 
Bill of material:
Copper tube: brass wiresilver-plated
Guide pin: brass wire, gold-plated
Ball: dual Stainless steel, silver-plated
Sealing colloidal particle: Heat resistance nylon
 
Welding characteristics
   Solder tin, tin content 100%
   Welding humidity: 260°C ±10°C
   Welding time: 2-2.5 seconds
Do not use strong acidalkali flux
 
Packaging: 1000PCS/bag (PVC plastic,According to conventional electronic material storage requirements for storage)
 
Note

1. 
   If the product used for high security products and durability of extremely high equipment (such as life safety equipment, aviation facilities, disaster prevention device), please confirm whether a share, can seek advice our company for details
2. In case of fire,Please do not overload applicable,
3. The welding temperature or time more than standard, can cause switch collapse
4. Do not use water solubility flux. May cause damage to the switch
5. Do not use solvent wash switch
6. This switch conduction rate of 98% (conductivity rate per 100 times value switch actions, can good conduction ratio)