Product Attribute:
Applicationt:
BMW, BYD
Production Description:
Description of Automobile whole electrical education board components
(1) Detection terminal: located in the panel circuit diagram, and the circuit connection of external components, convenient instrument detection of the vehicle electrical system working conditions;
(2) Central circuit board: mainly the centralized circuit board for the power distribution of the automobile whole electrical education board;
(3) Taillight: Taillight includes stop light, turn signal, brake light, reverse light, fog light
(left fog light, right fog light does not);
(4) Indoor light: there are two stalls, one is a switch control, the other is a gated switch control;
(5) License plate light: The license plate light is lit when the small light is turned on;
(6) headlights: mainly have close light, high beam and small front light;Controlled by headlight switch;
(7) Fog lamp: controlled by fog lamp switch, the fog lamp can only be turned on when the light switch is turned on;
(8) turn signal: it works when the danger alarm light switch or turn signal switch is opened;
(9) Left and right side width indicator light: when the small light is turned on, it is used for width indicator;
(10) headlight switch: by two stalls, I control small lights (including left and right parking lights, rear taillights and license plate lights) work, II control small lights and headlights work at the same time (at this time through the combined switch to change light operation) for control of small lights, near lights, high beams;At the same time also control fog lamp switch power supply;At the same time, there are two gears, I control the front fog lights work, II control the front and rear fog lights work at the same time;The fog lamp switch power supply is supplied by the headlamp switch. In other words, the fog lamp can control the work of the fog lamp only when the headlamp switch is on (grade I or II).
(11) combined switch: Automobile whole electrical education board there are three switches, respectively light switch, turn signal switch, wiper switch;The light switch can be used for the switch of the near and far light lamp and the operation of the car lamp;Turn signal switch can control the left and right side turn signal work;The wiper switch has five gears, which are point moving gear, stop gear, intermittent gear, slow gear and fast gear.
(12) Danger warning light switch: used to control the front and rear turn signals working at the same time switch;
(13) Brake switch: used to control the work of brake lights;
(14) Reversing switch: used to control the work of reversing lights;
(15) Gate switch: used to control the indoor lamp work;
(16) instrument lamp adjustment switch: adjust the brightness of the instrument lamp switch;
(17) Throttle body: used to adjust idle speed and increase the airflow opening of the system, so that the engine can reach the required working condition;Internal throttle position sensor and idle motor position sensor;
(18) Carbon tank solenoid valve: control the opening and closing of carbon tank recovery path;
(19) Engine temperature sensor: sensing engine temperature, input engine temperature to engine ECU;
(20) Knock sensor: it can sense the knock state of the engine and input deflagration signal to the engine ECU;
(21) Crankshaft position sensor: induction crankshaft position signal, input signal to ECU, control ignition and fuel injection main signal;
(22) Intake temperature sensor: located on the intake pipe, used for induction of intake temperature, intake temperature signal input to ECU;
(23) ECU: receives the signal from the sensor, sends the control signal to the actuator to complete the corresponding control function;
(24) Combined instrument: display the working condition of the system;
(25) Sound speaker: is the sound of the carrier, controlled by the audio host;
(26) Audio host: the work of controlling the audio system;
(27) Generator: charge the battery and control the work of the charge indicator;
(28) Starter: the component used to drive the flywheel when starting;
(29) Wiper assembly: there are five gears, respectively point moving gear, stop gear, intermittent gear, slow gear and fast gear;
(30) washing pump: used for front windshield washing water supply, and wiper matching use;
(31) Power assembly: located below the platform, composed of motor, used to power the charging system;
(32) Spark plug and ignition coil: used for ignition;
(33) Cigarette lighter: with heating wire, used for cigarette lighting;
(34) Two-tone speaker: a voice actuator, hand speaker switch control;
(35) Horn switch: located on the combined switch, control the work of the horn
(36) Temperature control switch: control the work of cooling fan, high gear and low gear;
(37) Heat dissipation fan: used for heat dissipation of engine system;
(38) Electric rearview mirror: controlled by the electric rearview mirror switch, used to observe the rear conditions of the carrier;
(39) Rearview mirror adjustment switch: switch to adjust the position of the electric rearview mirror lens;
(40) Comfort system electronic central control unit: control the work of the comfort system;
(41) Latching control unit: the device for controlling the central control lock;
(42) Door and window motor and control unit: door and window motor is to receive signals and control the lifting of doors and Windows;Control unit is to control the lock motor device;
(43) Door and window motor switch: control the lift of the window;
(44) The automobile whole electrical education boardDriver control main switch: the switch can control the opening and closing of the door lock, control the lifting of the front and rear Windows, and also has a window safety mode (when the safety mode switch is opened, the rear and passenger side window switch does not work)
Hot Tags: automobile whole electrical education board, China, manufacturers, suppliers, engineering, OEM, ODM, Diesel Engines Trainer, teaching didactic equipment, Electric Power Steering EPS , car engine teaching trainer, Engine Cutaway Model, Auto Air Con Trainer