Product Attribute:
Applicationt:
BMW
Production Description:
1.The Car light indicator education training board of Overview
The equipment adopts Volkswagen Passat B5 external lighting system as the basis, which can show the composition and working process of the external lighting system.It is suitable for the teaching of automobile lighting system theory and maintenance training.
1.2 Functions and Features
1. The real and operational exterior lighting system of the car can show the composition of the exterior lighting system of the car.
2, operate all kinds of light switches, can truly demonstrate the working process of the car external lighting system.
3, the teaching board surface board adopts 4mm thick corrosion resistance, impact resistance, pollution resistance, fire prevention, moisture-proof advanced aluminum plastic board, the surface by special process primer treatment; Fadeless color circuit diagram is printed on the panel, and varnish is sprayed on the surface.Students can understand and analyze the working principle of the automobile lighting system by directly comparing the circuit diagram with the real object.
4, the teaching board is installed on the surface of the detection terminal, can be directly on the panel to detect the electrical signals of the circuit components of the car external lighting system, such as resistance, voltage, current, frequency signals, etc..
5, the teaching board surface plate part adopts 1.5mm thick mold forming aluminum alloy frame structure;The bottom frame is made of 40*40*2.5mm cold rolled square welding with better strength than hot rolled square welding. The surface is treated by spraying process and flash brown spraying. It has the characteristics of beautiful, durable, wear resistant, chemical corrosion resistant and ultraviolet resistant.With self-locking caster device, the teaching board base is equipped with a table top of about 40cm, convenient to place data, light testing instruments, etc.
6. The Car light indicator education training board works with ordinary 220V AC power supply, which is converted into 12V DC power supply by internal circuit transformer rectifier. 12V DC power supply must have anti-short circuit function.
7, equipped with fault setting and assessment system.
1.3 Technical Specifications
1, overall size: 1600×700×1700mm(length × width × height)
2, external power supply: AC 220V±10% 50Hz
3, working voltage: DC 12V
4, working temperature: -40 ~ +50
The Car light indicator education training board operation steps of the product:
1. Connect the power plug of the teaching board to the power supply (220V AC, and the transformer rectifier device inside the product is transformed into THE DC power supply of 12V);
2, open the ignition key, through a variety of switches set on the panel to achieve the following system functions:
1) Turn the headlight switch to level 1: the small light in the headlight, the small light in the combined taillight, and the license plate light provide power for fog lamp lighting;
2) Turn the headlight switch to the second position: the small light in the headlight, the small light in the combined taillight, the license plate light, provide power for the fog lamp lighting, and connect the left and right headlights with the combined switch.
3) Turn on the fog light switch when the headlight switch is in gear 1 or 2: the fog lights at the front and left of the training platform are on;
4) Press the reverse light switch: connect the reverse light circuit, and the reverse light installed on the left and right combined taillights;
5) Press the brake light switch: disconnect the brake light circuit, and the brake lights installed on the left and right combined taillights turn off;
6) Operation combination switch: in the headlight switch in the second position, can complete the headlight from far and near light to light; Operation turn signal control lever, can complete control left or right turn signal and turn sidelight flashing; Operation of the hazard light switch, can complete the control of the left and right turn light and turn sidelight flashing at the same time;
3. After completing the normal use function and fault setting function, please close the ignition key, cut off the three-phase power supply, disconnect the battery switch and restore the fault setting switch.
Hot Tags: car light indicator education training board, China, manufacturers, suppliers, engineering, OEM, ODM, air conditioning training, car engine and accessories, vacuum assisted hydraulic brake training bench, educational training kits, Automotive Transaxle, Automotive Electrical System Trainer Board Panel