Product Attribute:
Size:3.2mm
Material:Rubber
Applicationt:
Alfa Romeo ( 156)
Audi ( A6L, A4L, A4, A1, A8, A5, R8, Q7, Q5, TT, S6, S4, Allroad)
Buick ( Regal, GL8, Exclle, LaCROSS, Park Avenue, Enclave)
Dadi ( Pickup)
Ferrari ( F360, F430, ENZO, 612, 599GTB)
Foton ( Auman, Auv, Aumark, View, Sup, Ollin)
Fuqi ( Conqueror)
Gonow ( GX6, GS50, GX5)
Honda ( Odyssey, City, Fit, Accord, CR- V, Civic, Stream, FCX)
Huandai ( Tucson, Ellantra, Sonata, Equus, Rohens, New Coupe, Veracruz, Azera, New Santa Fe)
Hyundai ( Rohens, Veracruz, Equus, Azera, New Coupe, New Santa Ve)
JMC ( Transit, Buv)
Land Rover ( Discovery, Freelander, LR3, Range Rover)
Lincoln ( Navigator)
Maybach ( 62, 57)
MG ( MG7, TF, MG3)
Mitsubishi ( Pajerosport, Outlander, Lancer, Gallant)
Peugeot ( 206, 307, 206CC, 307CC, 407, 607, 207, 207CC, 307SW)
Porsche ( 911, Boxster, Carrera, Catera, Cayenne, Cayman)
Rolls Royce ( Phantom)
Skoda ( Octavia, Superb, Fabia)
Ssangyong ( Actyon, Rexton, Rodius, Kyton)
Suzuki ( ALTO, Lingyang, SWIFT, SX4, LIANA, Jimny, Grand Vitara)
Volkswagen ( Santana, Polo, Touareg, Tiguan, Bora, Golf, Jetta, Sagitar, Magotan)
VW ( Phaeton, New Bettle, Touareg, EOS, T5, Magotan)
Aux
Changan
LIFAN
Zhongxing
Huanghai Auto
Zotye
Production Description:
1.Brake hose is made strictly according to SAE J1401
2.ISO9001-2000, DOT
3.For OEM and aftermarket.
Commodity |
Hydraulic brake hose |
|
Standards |
SAE J1401 |
|
Quality control |
DOT, ISO9001-2000 |
Material |
-Tube: Made of EPDM, perfectly resist oil, heat and permeation of water;
-Reinforcement: Made of high strength polyester fiber treated by special resin;
-Middle layer: By using viscosity-strengthen middle rubber between reinforcement to provide high dynamic capability;
-Cover: Made of EPDM, perfectly resist heat and ozone |
|
Brake fluid |
DOT3, DOT4, DOT4+ |
Normal size |
3.2mm x 10.5mm(1/8)
3.2mm x 12.5mm(1/8)
4.8mm x 12.5mm(3/16) |
|
Special size |
3.0mm x 11.0mm, 3.5mm x 10.7mm etc |
Feature |
Low inner cubage expansion;
Resistance of heat and ozone;
Low moisture permeation, whip and impulse;
Working temperature: -55degree to +125degree;
Burst pressure: 60Mpa. |
|
Length/piece |
10 - 50m |