Roller Type One Way Clutch AE Series（One Way Bearing）

Product Attribute:

Inner diameter :25mm

Number of Row:Single Row

Bore Size:25mm

Outer Diameter :80mm

Type:Roller Bearing

Hight:37mm

Weight:0.98kg

Applicationt: 

All cars

Production Description:

Roller Type One Way Clutch AE SeriesOne Way Bearing

Type AE is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside diameter is a standard ball bearing dimension.
A typical arrangement is to install this type beside a bearing with the same housing diameter tolerance as shown on the following page.
The inner race is keyed to the shaft. The outer race has a h6 tolerance and should be fitted in a housing with a K7 tolerance. Additional side notches provide for positive torque transmission.
If the housing tolerance is to R6, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.