Street Address: Dingan Road
City: Changzhou
Province: Jiangsu
Country/Region: China
Material:other
All cars
Installation and Usage 1. The outer race of the TFS Series Cam Clutch is designed for press fit installation to the housing. Correct interference dimensions of the outer race must be maintained to obtain maximum clutch performance.The internal diameter of the housing should meet the H7 tolerance. Keyways should be made in the end faces of the clutch for proper installation. 2. Make sure the housing has enough strength to withstand the pressure required for the press fitting installation of the clutch. 3. When installing the clutch, mount it with a type 63 bearing to avoid radial force, since this clutch does not have any bearing support. 4. The clutch should be mounted on the shaft by rotating it in the direction marked by the arrow shown on the clutch plate. 5. The recommended shaft tolerate is h7, and the key profile should be in accordance with the following standard. 6. Suitable surface pressure of the key should be selected according to your company design standards. Lubrication 1. Oil lubrication is recommended. 2. Do not use greases or lubricants with EP additives. Data Drawing legend d=inner diameter D=outer diameter L = width TKN = torque n = rotation speed b = keyway width t = keyway depth