OEM No/Model: WSP20286HT4K7026
1. Requirements for bearing design:1.1.1. Overall dimensions of the bearing:- outer diameter: 15 0-0,005 mm,- inside diameter: 10 0-0,005 mm,- height: 2.5 0-0.025 mm.- The mounting chamfer of the bearing on all its seating surfaces must be: (0,1 0,2) mm * 45o.1.1.2. Bearing Accuracy Class: Grade 4 according to ISO 492.1.1.3. Degree of accuracy of balls: 3 class according to ISO 3290.1.1.4. Contact angle: (18 ± 2) o.1.1.5. The radial clearance should be in the range of 0.008 mm to 0.015 mm.1.1.6. The axial clearance must be between 0.040 mm and 0.085 mm.1.1.7. The separator shall not protrude beyond its ends by more than 0.5 mm. The centering of the separator must take place on the outer ring of the bearing. The gap in the separator socket between its wall and the ball must be from 65 μm to 100 μm per side.1.1.8. The undulations of the inner and outer rings must not exceed 0.0001 mm.1.1.9. Material of inner and outer bearing rings: AISI 440C steel or equivalent, with a hardness of 58-62 HRC.1.1.10. Balls Material: AISI 440C steel or equivalent with a hardness of 58-62 HRC or Si3N4 ceramics.1.1.11. Separator Material: TORLON 4301 PAI or TORLON 4275 PAI or TORLON 4203 PAI.1.1.12. The design of the bearing must ensure its operability in the operating temperature range from minus 80 ° C to 100 ° C.Environmental climatic conditions in which the parameters given in section 1.1 are to be measured: temperature + 20 ± 2 ° C; relative humidity 60%;100 atmospheric pressure 100 ± 4 kPa (750 ± 30 mmHg).
1.2. Requirements for basic bearing parameters:1.2.1. Radial static load o not less than 257 N.1.2.2. Radial dynamic load C of not less than 350 N.1.2.3. Axial static Cax load of not less than 180 N.1.2.4. Rated speed: 5,000 rpm (hereinafter rpm).1.2.5. The overall vibration level (vibration velocity, hereinafter referred to as ROD) should not exceed160 μm / s for a total frequency range from 50 Hz to 10,000 Hz. The RWM is measured for all bearings exclusively in the dry state, ie without the us
Monton Bearing can supply the customized bearings according to the request.
We have developed one thin section angular contact ball bearings with the dimension 10*15*2.5mm.This bearings are made with special stainless stell material with non-magnatic performance and with P4 accuracy.The width is only 4mm,with 1mm special ball.We have realize batch production for this kinds bearings and now the bearings have been widely used in Russia,iran or USA on the missle.
Character:
Dimension:10152,5 mm
Accuracy:High precision
Material:Special Non-Magantic stainless steel
The technical requirements:Accuracy class:P4.Type - angular contact (18 degrees).Dynamic lift capacity, r , not less, N 700.Static lift capacity, or, not less, N 400.Retainer materials torlon 4301 PAI.Rings materials steel AISI 440C.Radial play, μm 510.Running torque, not more, μN·m 70.Accuracy class for balls 3.Waviness for raceway outer and inner rings, not more, µm 0,1.The general level of vibration, velocity, is measured by ISO 15242 in complete range of frequencies from 50 Hz to 10 000 Hz - not more 200 µm/s (72 dB) (for dry ball-bearings).Nominal number of turns, n, rpm - 6000.
Application:Missile
In the same time:
Monton bearings can also supply other kinds special missile bearings from 2mm~100mm including the non-standard deep groove ball bearings,the non-standard angular contact ball bearings and the non-stand cylindrical roller bearings,ect.
Thin Section Bearing Application
AircraftAerospace and astronomy instrumentationFixing and work holding equipmentFood processing equipmentGlass working equipmentIndex and rotary tablesPacking equipmentMachine toolsMedical devicesOptical scanning equipmentRadarSatellite and communications equipmentRoboticsTextile machineryTube and pipe cutting machinesSemiconductor manufacturing equipmentSorting equipment
Related Product Tags:
air bearing , auto air conditioner bearing , air conditioner bearing , air conditioner bearings , alternator bearing , alternator bearing ford , alternator bearings , axle bearing , rear axle bearing , ball bearing ring , ball bearing units , ball bearings , automobile ball bearings , ceramic ball bearing , Screw Ball Bearing , contact ball bearing , loose ball bearing , loose ball bearings