Quick Details

• Place of Origin:

  CHINA

• OE Experience:

  No

Product Name:needlerollerbearing

needlerollerbearing

Application

general

Product Description:

OEM No/Model: FUMS0001
The outer ring of drawn cup needle roller bearing is punched with the high-quality steel sheet, The outer ring has thin wall . The drawn cup needle roller bearing has the characteristics of small radial section area, large load carrying capacity, less inertia and economic manufacture.It is suitable for small section height, or when the housing bore is not used for raceway, this type is recommended to use. The bearing is assembled into the housing bore under a certain pressure without further axial location. The drawn cup needle roller bearing generally takes its shaft diameter as the internal raceway. However，the proper LR type inner ring can be used in accordance with application condition . The drawn cup needle roller bearing has two structures - with retainer and with full of needles. They are divided into open-end type and close-end type. The structure with retainer has the single seal ring and double seal ring. The structure with full of needles has a large load carrying capacity. FUMS can provide all drawn cup needle roller bearings listed in this catalogue, including standard size and non-standard metric size, and inch-series as well as the high-precision drawn cup needle roller bearings with special requirements such oil hole in outer ring, double-row needles, nylon retainer inner ring, seal ring, etc. (special technical requirement on order).

Jiangsu NiuBen Bearing Co., Ltd. was established in 2002, mainly produces a variety of needle roller bearings, cylindrical bearings, one-way bearings and so on. In particular, the design of one-way clutch bearings, one-way bearings, needle roller bearings and thrust roller bearings has reached a ...[Read More]

Company Profile:

• Main Product:

  Needle roller bearing

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa, Oceania

Factory Profile:

• Number of Employees:

  201 - 300 People

• Shift:

  2

• Size of Factory In Square Meters:

  15000

• Years of OEM Experiences:

  15

Research & Development:

• Capability for Synchronized Development:

  Develop according to drawing or samples provided by clients?Yes

  Develop 3-D model and prototype according to client's needs?Yes

• Tooling Design:

  Design Internally

• Source of Tooling:

  Made Internally

• Software/Profile:

  Unigraphics, AUTOCAD, Autodesk Inventor, Pro/E, Catia