Quick Details

• Pressure:

  Medium Pressure

• Material:

  Stainless Steel

• Standard or Nonstandard:

  Standard

• Power:

  Pneumatic

• Media:

  Water

• Temperature of Media:

  High Temperature

• Place of Origin:

  China

• Delivery Time:

  30 Days

• Packing:

  Carton Box, Ply Wooden Case, Wooden Case

• Delivery Port:

  Shanghai Port

• Max. Production Capacity:

  300 Units/Month

• Export Ratio:

  91% - 100%

• OE Experience:

  No

Product Name:Cage-Guided Globe Control Valve

Cage-Guided Globe Control Valve

Application

Changan, Chevrolet, Changhe Auto, DAEWOO, Lamborghini, Land rover, Landwind, Zhonghua, Zhongxing

Product Description:

ACP series Pressure-Balanced Cage type Control Valve
Type: Straight-through, cast globe valve
Size: 1-1/2'',  2'',  2-1/2'', 3'', 4'', 5'', 6'', 8'' (DN40  DN200)
Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN100, JIS10K~JIS40K)
Body Material: Carbon steel, Stainless steel, Alloy steel
Operation: Pneumatic diaphragm actuator, Pneumatic piston actuator, Electric actuator
OVERVIEW
The model ACP pressure-balanced cage type control valves are designed for heavy duty service. The valve plug employs a pressure balance function to control high differential pressure fluid with small actuator force.
The ACP realizes seat leakage performance as single seat valve by seal ring structure. In addition, the ACP is equipped the cage plug with a scraper ring to prevent a malfunction caused by foreign object enter between the cage plug and the cage. The actuator is adopted a compact and powerful diaphragm motor.
The ACP is widely applicable for reliable control of high or low temperature, high differential pressure process lines where dynamic stability, dynamic stability, low noise, anti-cavitation/flashing are required.
 
SPECIFICATIONS
Body Type: Straight-through, cast globe valve
Nominal size: 1-1/2,  2,  2-1/2, 3, 4, 5, 6, 8 
Pressure rating:    JIS 10K, 16K, 20K, 30K, 40K
                             ANSI Class 125, 150, 300, 600
                                 JPI Class 125, 150, 300, 600
End connection:    Flanged end;
                                 Welded end; SW (1-1/2, 2), BW (2-1/2 to 8)
For body/trim material combinations and operating temperature ranges, refer to Table 1.
 
Bonnet:
 Plain bonnet (-17 to 230°C)
 Extension bonnet Type 1 (-45 to -17°C and 230 to 360°C)
 Extension bonnet Type 2
Integral cast type (-100 to -45°C),
Welded type (-196 to -100°C)
Note) Take care not to exceed the operating temperature ranges specified for respective materials.
Gland type: Bolted gland
Packing / Grease
 Grease not provided
When V-shaped PTFE packing or PTFE yarn packing is used.
 Grease provided
When graphite packing is used.
 
Trim
Valve plug: Single seated pressure balanced type
Cage: High-flow characteristics
-Metal seat (For flow characteristics, refer to Figure 2.)
-Equal percentage (%V)
-Linear (LV)
Material
For body/trim material combinations and operating temperature ranges, refer to Table 1.
Note) For fluid conditions that require Stellite, refer to Figure 3.
Actuator Type: Single acting diaphragm actuator (Type HA)
Action: Direct or reverse action
Diaphragm
Type HA: Cloth embedded ethylene propylene rubber
Spring range:
20 to 98 kPa {0.2 to 1.0 kgf/cmÇ}
80 to 240 kPa {0.8 to 2.4 kgf/cmÇ}
Supply pressure:
Diaphragm actuator
Type HA:140 to 390 kPa {1.4 to 4.0 kgf/cmÇ}
Note) Allowable differential pressure varies depending on spring range and air supply pressure.
Air connection: Rc1/4 or 1/4NPT internal thread
Ambient temperature: -30 to 70 °C
Valve action:
Air-to-close (Direct action actuator is combined.)
Air-to-open (Reverse action actuator is combined.)
Optional accessories
Positioner, pressure regulator with filter, hand wheel, limit switch, solenoid valve, motion transmitter, booster relay, lock-up valve, and others.
Note 1)For optional items, refer to the specification sheets and installation drawings of the respective accessories.
Accessories with the asterisk mark (*) are selected from among the following types depending on the actuators to be combined.

THINKTANK is the sole production and R&D institute of Taiwan STONE Company in Mainland China. ThinkTank entered China market in 2002 and separate Shanghai office in 2012. Based on over 30 years experience in researching and manufacturing automatic instruments, bringing in overseas advanced ...[Read More]

Company Profile:

• Main Product:

  Control Valve, Ball Valve, Shut off Valve, Butterfly Valve

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Europe, Eastern Asia, Southeast Asia, Mid East, Africa, Oceania

• Total Annual Sales:

  USD 2,000,001 - 5,000,000

Factory Profile:

• Number of Employees:

  401 - 500 People