Detailed Product Description
Professional factory
1.Timing belt Material: CR/HNBR /EPDM
2.Warranty:50000kms
3.E-mark/ISO/TS16949
4.Print your brand
Type |
Pitch |
Tooth height |
Belt thickness |
Type |
Pitch |
Tooth height |
Belt thickness |
R(MR) |
9.525 |
3.54 |
5.69 |
ZR |
9.525 |
3.20 |
5.40 |
Y(MY) |
8 |
3.11 |
5.21 |
ZAS |
9.525 |
2.32 |
4.62 |
ZBS |
9.525 |
2.80 |
5.10 |
ZB |
9.525 |
2.29 |
4.50 |
YU |
8 |
3.109 |
5.20 |
RHD |
9.525 |
3.50 |
5.70 |
RU |
9.525 |
3.56 |
5.70 |
RHX |
9.525 |
2.617 |
4.80 |
ZA |
9.525 |
1.91 |
4.10 |
RPP |
9.525 |
2.25 |
4.50 |
FS8M |
8 |
3.05 |
5.30 |
SL |
9.525 |
3.40 |
5.50 |
ZD |
9.525 |
3.50 |
5.50 |
|
|
|
|
Type |
Tooth No. |
R(MR) |
70 78 89 92 94 97 101 102 103 104 105 106 107 108 109 110 111 113 117 124 125 127 129 130 133 149 157 158 177 |
Y(MY) |
99 100 103? 106 107 112 117 113 121 123 124 127 128 129 131 137 142 143 145 146 159 169 177 178 191 211 |
ZBS |
55 65 69 76 83 87 91 92 101 112 117 119 120 122 123 134 136 137 141 143 149 163 |
YU |
65 76 83 99 100 101 103 107 109 110 111 113 117121 140 142 145 146 153 154 156 159 164 168 177 187 193 195 207 210 211 226 228 251 257 265 281 |
RU |
59 70 76 79 83 89 91 92 93 95 97 98 101 103 104 105 106 107 108 109 110 111 112 113 117 122 123 124 125 126 127 130 133 145 149 151 153 154 158 163 176 |
ZA |
54 55 63 69 76 83 84 87 88 89 90 91 92 94 95 98 102 103 106 109 111 116 117 120 121 122 123 124 126 127 133 139 142 |
S8M |
65 91 105 109 110 123 137 141 142 146 149 151 162 163 164 169 171 173 179 191 209 239 |
Also produce: R(MR) Y(MY) RU YU ZA ZB ZC ZD ZAS RHD SHX SRP |
NOTICE TO USE OF TRANSMISSION BELT
Protection:
1.To avoid direct sunshine and rain and snow,keep clean,and protect,keep normal temperature
2.To avoid contact with materials affect quality of rubber like acid,alkali,organic solution ,and poison drug.
3.Put it correctly,to avoid transfigurafion cause by squeezing.
4.Hang it on holders or put it flat,cannot put it on ground
Installation:
1.It is forbidden to install it in force
2.Correctly adjust parallelism and eccentricit these belts
Tension:
1.To apply tension correctly ,defletion and loading should be calculated when tension of the belt is adjusted
2.The surface harshness should be between Ra 1.6-Ra 3.2
Belts should be used after rust is removed
1.Paint wax can not to coated on the belts and rubber
2.To avoid rubber and belts polluted by dust and oil
Please check there is any wear and tear on the belts,If the belt is seriously worn ,please replace it
Related Product Tags:
auto belt , auto belts , auto belts jaguar , antistatic belt , alternator belt , volvo truck belt , triangle belt , type belt , variable speed belt , speed belt , slimming belt , series belt machine , series belt type machine , three point belt , tranmission belt , passenger car belt , narrrow belt , motor vehicle belt