Quick Details

• Place of Origin:

  Japan

• Delivery Time:

  0

• Packing:

  Strong polybag+ Single brand box/ As your requirement

• Delivery Port:

  Shanghai

• OE Experience:

  No

Product Name:NSK Thrust Angular contact Ball Bearing 30TAC62BSUC10PN7B

NSK Thrust Angular contact Ball Bearing 30TAC62BSUC10PN7B

Application

Universal

Product Description:

OEM No/Model: 30TAC62BSUC10PN7B

NSK Thrust Ball Bearing
1.High speed and high precision thrust ball bearing
2.Low vibration and noise
3.NSK ball bearing

NSK Thrust Angular contact Ball Bearing 30TAC62BSUC10PN7B

Analysis 30TAC62BSUC10PN7B

TAC: thrust Angle contact ball bearing contact Angle 60o

SUS: universal combination

(C10: standard single)

PN7B: pre-tightened od sent special management ISO4 precision (equivalent to level, SUS combination special)

classification: ball screw support dxDxH with bearings

(specification) : 30 x 62 x 15mm

cautions:

1. The bearings for universal combination bearings, can be the same nominal bearings for2 column, 3 combination of fathers, 4 columns of several forms of use. Due to the outer diameter on single bearing surface symbol is marked "v", so if use 2 listed above, please combined form of combination and confirmed according to here is marked "v" the direction of use.

2. Assembly note don't exert impact load and bearing.

3. The largest position, radial vibration respectively circle side or chamfering parts marked "o" mark and in the outer diameter face marked "v". Installation of the bearing and if maximum eccentric shaft or opposite position to align the position will make bearing rotation precision in the best state

Features :
Thrust ball bearings consist of two precision chrome steel washers (ring) and a ball complement spaced by bronze retainer. They can be supplied with or without radius ball grooves in the rings. Thrust bearings are used under purely axial loads.Thrust ball bearings can handle loads in the axial direction only. Bearing rings mounted on the shaft are called shaft washers, and those mounted in the housing are called housing washers. Both washers contain raceways for the balls.Thrust ball bearings are available as both single and bi-directional types. The bi-directional thrust bearing incorporates a third washer and an additional set of balls. This center washer is located in the axial direction by a shaft shoulder and sleeve.Care must be taken in handling to prevent damage to the separable rings and ball assemblies.

Applications :
Thrust ball bearing is use for lathes, lead screws, automotive clutches, kingpin supports, speed reducers.

1.Single direction thrust ball bearings
NSK single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage thrust assembly. The bearings are separable so that mounting is simple as the washers and the ball and cage assembly can be mounted separately.

Smaller sizes are available with either a flat seat surface on the housing washer or a sphered seat surface .Bearings with a sphered housing washer can be used together with a sphered seat washer to compensate for misalignment between the support surface in the housing and the shaft. Sphered seat washers are available from SKF but must be ordered separately.

Single direction thrust ball bearings, as their name suggests, can accommodate axial loads in one direction and thus locate a shaft axially in one direction. They must not be subjected to any radial load.

2.Double direction thrust ball bearings
NSKdouble direction thrust ball bearings consist of one shaft washer, two housing washers and two ball and cage thrust assemblies. The bearings are separable so that mounting is simple. The various parts can be mounted separately. The housing washers and ball and cage thrust assemblies are identical to those of the single direction bearings.

Smaller bearings are available with either a flat seat surface on the housing washers or with a sphered seat surface. Bearings with sphered housing washers can be used together with sphered seat washers to compensate for misalignment between the housing and shaft. The sphered seat washers are available from SKF, but must be ordered separately.

Double direction thrust ball bearings can accommodate axial loads acting in both directions and can thus serve to axially locate a shaft in both directions. They must not be subjected to radial load.

Update Date:2011-06-16 06:14:26

Nanjing Younarui Bearing Co., Ltd. is an import domestic bearing trading company. Our core products are well-known brand bearings, including Swedish SKF bearings, German FAG bearings, German INA bearings, Japanese KOYO bearings, Japanese NMB bearings, Japanese THK bearings, ...[Read More]

Company Profile:

• Main Product:

  bearings,SKF bearings,ball bearings,roller bearings,NSK bearings

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania