NDIR CO2 Sensor Module And OEM Platform,China Auto Parts,buy NDIR CO2 Sensor ,Suppliers, Manufacturers, Exporters from gasgoo.com

Home » Product Directory » Electricity & Electronics » Sensor » Other parts »

Image for NDIR CO2 Sensor Module And OEM Platform

NDIR CO2 Sensor Module And OEM Platform

Application: \
Market Type:After Market
Price: Inquiry For It?

Contact Supplier no sign-up required

Add to Favorites

Product Details

Company Profile

Quick Details

OE Experience:
No

Product Name:NDIR CO2 Sensor Module And OEM Platform

NDIR CO2 Sensor Module And OEM Platform

Application

\

Product Description:

CO2 Engine K30 STA
Sensor Module and OEM Platform

CO2 Engine K30 STA NDIR CO2 Sensor Module General
The K30 sensor platform CO2 Engine K30 STA can be customized for a variety of sensing and control applications. This platform is designed to be an OEM module for built-in applications in a host apparatus, and hence should be optimized for its tasks during a dialog between SenseAir and the OEM customer. K30 is a flexible product with 2 analog outputs and 2 digital outputs that can be configured with SADK or other custom software to meet your requirement.

CO2 Engine K30 STA NDIR CO2 Sensor Module Technical specification

Item	CO2 Engine K30 STA Art. no. 030-8-0006
Target gas	Carbon dioxide (CO2)
Operating Principle	Non-dispersive infrared (NDIR)
Measurement range	0 to 5000 ppm
Accuracy	±30 ppm±3% of reading ¹
Response time (T 1/e )	20 sec diffusion time
Rate of Measurement	0.5 Hz
Operating temperature	0 to +50°C
Operating humidity	0 to 95% RH non condensed
Storage temperature	-30 to +70°C
Dimensions (mm)	51 x 57 x 14 mm (Length x Width x approximate Height)
Power supply	4.5 to 14.0 VDC maximum rating (without reverse polarity protection) stabilized to +-5% over load and line changes. Ripple voltage less than 100mV. ²
Warm Up time to spec precision	1 min
Life expectancy	>15 years
Compliance with	RoHS directive 2011/65/EU Tested according; Immunity EN 61000-6-3:2007, Emission:EN 61000-6-2:2007
Serial communication	UART, Modbus protocol. Direction control pin for direct connection to RS485 receiver integrated circuit.
OUT 1	D/A Resolution:10 mV (10 bit) Linear Conversion Range: 0 to 4 V = 0 to 2000 ppm Electrical Characteristics: R OUT < 100 R LOAD > 5 k
OUT 2	D/A Resolution:5 mV (10 bit) Linear Conversion Range:1 to 5V = 0 to 2000 ppm Electrical Characteristics: ROUT < 100 R LOAD > 5k
OUT 3	Digital (High/Low) output, 700/800 ppm
OUT 4	Digital (High/Low) output, 900/1000 ppm
Maintenance	Maintenance-free when using SenseAir ABC algorithm (Automatic Baseline Correction).

¹Accuracy is specified over operating temperature range at normal pressure 101.3 kPa. Specification is referenced to certified calibration mixtures. Uncertainty of calibration gas mixtures (+-2% currently) is to be added to the specified accuracy for absolute measurements.
²Notice that absolute maximum rating is 14V, so that sensor can be used with a 12V+-10% supply.