RPS-409A-2P Self Contained Ultrasonic Sensor Features
Input Voltage 20-30VDC
Reverse Polarity Protected
Analog Voltage Output
Analog Current Output
Short Circuit Protected
Wide Temperature Range
Temperature Compensation
Various Sensing Ranges
Self Contained Sensor
Quick Disconnect Connector
PVC Housing
Sync/Tx Input Line
RPS-409A-2P Self Contained Ultrasonic Sensor Description
The RPS-409A-2P analog ultrasonic sensor is a self contained sensor in a PVC housing with 2 NPT mounting threads. It is powered by 20 - 30VDC with reverse polarity protection.
The RPS-409A-2P has a short circuit protected analog current sourcing 20 - 4mA output or an analog voltage 0 - 10VDC output. The analog current/voltage is a fixed mA/volts per inch based on the maximum range of the sensor.
The RPS-409A-2P has temperature compensation built in to provide accurate readings throughout the entire operating temperature range. The sensor is completely sealed and the connection is made by way of IP and NEMA rated cables.
In addition to the power and analog output lines there is also a Sync/Tx line. This can be used for connecting multiple sensors together to prevent cross talk (Sync), or to force the sensor to transmit at a particular time/interval (Tx).
The RPS-409A-2P is designed to take advantage of todays PLC and computer analog input cards. The analog card chosen will determine the resolution of the system. The numerical values that are programmed into the PLC or computer will determine the zero and span.
If a set point or set points are required in the application, please refer to Migatrons SPC-701, SPC-704, or M-1000 control products. Both the SPC-704 and M-1000 can also provide excitation power to drive the sensor.
RPS-409A-2P Self Contained Ultrasonic Sensor Specifications
Mode | Range | Input Current | Frequency | Response Time |
RPS-409A-40-2P | 3 - 40" | 35mA Typical | 175kHz | 25ms Typical |
RPS-409A-80-2P | 6 - 80" | 35mA Typical | 135kHz | 25ms Typical |
RPS-409A-144-2P | 10 - 144" | 45mA Typical | 70kHz | 75ms Typical |
Power Input: | 20 - 30VDC Reverse Polarity Protected | |||
Ambient Temperature: | -40 - 60°C / -40 - 140°F | |||
Humidity: | 0 - 95% Non-Condensing | |||
Housing Material: | PVC with PVC Sensing Face | |||
Housing Rating: | IP67 | |||
Output: | Current Sourcing Analog Output 20 - 4mA (Load 0 - 500 Ohms Maximum) | |||
Analog Voltage Output 0 - 10V (Load 500 Ohms to Infinity) Short Circuit Protected | ||||
Weight: | 280g / 10 ounces, without Cable |
PART NUMBER | RANGE | OUTPUT / DESCRIPTION |
RPS-409A-40-2PA RPS-409A-40-2PV RPS-409A-80-2PA RPS-409A-80-2PV RPS-409A-144-2PA RPS-409A-144-2PV |
3 - 40" 3 - 40" 6 - 80" 6 - 80" 10 - 144" 10 - 144" |
Analog Current 20 - 4mA - Cable Sold Separately Analog Voltage 0 - 10VDC - Cable Sold Separately Analog Current 20 - 4mA - Cable Sold Separately Analog Voltage 0 - 10VDC - Cable Sold Separately Analog Current 20 - 4mA - Cable Sold Separately Analog Voltage 0 - 10VDC - Cable Sold Separately |
F32-5001183 F32-5001186 |
2 meter QD CABLE, M12 4-Pin 22 AWG 5 meter QD CABLE, M12 4-Pin 22 AWG |
Related Product Tags:
coolant sensor , crank sensor , Crank Shaft Sensor , egr sensor , electronic sensor , s3 fuel sensor , Fuel Sender , fuel sensor , fuel sensor assembly , hall sensor , head lamp sensor , car head lamp sensor , impact sensor , mark sensor , oil level sensor , throttle sensor