CV7-OEM Ultrasonic Wind Speed Sensor Description
CV7-OEM shows the same features as the CV7 standard: light, compact and low energy consumption.
With this OEM version of the Static Wind Transducer CV7, you can add an accurate Ultrasonic Wind Sensor to your own products and installations. It is powered by 8-30 VDC power supply and it outputs RS232/RS422/NMEA0183 signal.
CV7-OEM Ultrasonic Wind Speed Sensor Specification:
Output data format |
NMEA0183, MWV, XDR |
Information transmited |
Instant. W. Speed, Instant. W. Angle, avaibility |
Output rate |
2 Hz / 30 Hz measurement *4 Hz / 60 Hz meas. |
Wind module sensitivity |
0.12 m/s |
Wind module resolution |
0.05 m/s |
Wind module dynamic |
0.12 to 40 m/s |
Direction sensitivity |
+/-1.5° |
Direction resolution |
1° |
Power supply |
8 V to 30 V DC |
Electrical consumption |
9 mA |
Op. temp. without icing |
-15° C to +55° C |
Cable |
50 cm / 4x0.22 mm2 |
Connection |
4 wires |
Weight of the head |
100 gr |
Weight of unit assembly |
N/A |
Mounting |
N/A |
Options
These industrial option are "Din" boxes with:
1x connection for 24VDC/AC power supply
1x connection for CV7-V data
1x 12 V connection for CV7-V power supply
Galvanic isolation between power supply and analog outputs
Galvanic isolation between power supply and sensor's power supply
The sensor input is optocoupled.
420 AC
This option features :
1 4-20 mA output loop current for wind speed ranging from 0.25 Kts to 80 Kts and CV7 measurement check.
1 4-20 mA output loop current for wind direction ranging from 0 to 359° and CV7 measurement check.
2 Dry contacts for wind speed alarm
ANA-AC
This option features 3 outputs 0-10V:
0-15m/s
0-30m/s or 0-40m/s selectable
0-359° wind direction
Related Product Tags:
coolant sensor , crank sensor , Crank Shaft Sensor , egr sensor , electronic sensor , s3 fuel sensor , Fuel Sender , fuel sensor , fuel sensor assembly , hall sensor , head lamp sensor , car head lamp sensor , impact sensor , mark sensor , oil level sensor , throttle sensor