Product Name: Restorer For rain sensor National patent Product
Usage:
1.Pull up or remove the rain sensor while cleaning with tissue, and stuck the leash of the rain sensor by the rain sensor mate, rubbing to-and-fro in 10cm distance slowly.
2.Rubbing it by the thicker side as marked, then use thinner side and put back. Test rub with water and rub the unsatisfied part.
3.The rain sensor for sedan limousine must be rubbed slowly.
Precautions: 1.Rubbing the rain sensor may produce sudden heat causing the leash to melt and adhere to the channel slot, which will damage the rain sensor and restorer.
Therefore, it is forbidden to polish the entire leash vertically as to avoid heating up.
It is recommended to wipe dry the rain sensor before rubbing, otherwise it may affect the effect by the leash powder rubbed and adhere to the restorer.
Related Product Tags:
coolant sensor , crank sensor , Crank Shaft Sensor , egr sensor , electronic sensor , s3 fuel sensor , Fuel Sender , fuel sensor , fuel sensor assembly , hall sensor , head lamp sensor , car head lamp sensor , impact sensor , mark sensor , oil level sensor , throttle sensor