. ApplicationTQG19 speed sensor is a dual channel Hall rotation speed sensor, and it is applied for the measurement of the rotation speed, linear speed and acceleration of wheel &axle and the control of these parameters. Its characteristics are non-contact with measured gear, no abrasion, easy installation, simple and reliable, wide measured speed range, wide applicable temperature range, excellent resistance to vibration and leak tightness features.
. Main Technical Parameters 1. Speed measuring range: 0Hz~10kHz2. Operating air gap: 0.1mm~1.5mm3. Speed measuring gearm≥2, Material with magnetic permeability4. Operating temperature: -40~1005. Supply voltage: 12VDC~18VDC6. Output waveformSine wave 7. Output channel numberdual channel8. Output voltage amplitude: when load resistance≥950Ω: High level VH≥9.5V, Low level VL≤2.0V 9. Duty ratio of waveform:50%±25%10. Phase difference: 90°±45°11. Max. output load:10mA12. Power consumptionno-load: ≤33mA13. Polarity protectionAvailable14. Output shortcircuit protection Available15. Insulation resistance: 500MΩ500V megger16. Insulation strength: 1500V/60Hz/1min17. Vibration resistance: 5g Impact resistance: 100g
Related Product Tags:
coolant sensor , crank sensor , Crank Shaft Sensor , egr sensor , electronic sensor , s3 fuel sensor , Fuel Sender , fuel sensor , fuel sensor assembly , hall sensor , head lamp sensor , car head lamp sensor , impact sensor , mark sensor , oil level sensor , throttle sensor