ApplicationTQG19G speed sensor is a double-channel Hall speed sensor, and it is installed to the case or case cover of transmission gear, the tested rotary object is magnetic conductibility gear whose module is equal to 2.75. It is composed of permanent-magnet steel, magnetic energy converter, amplifier shaping circuit, shell, shield cable, connector, etc. Output signal is square wave, adapting operation with other speed measuring control equipment in the various transport facilities. The sensor can detect the rotational speed of slewing gear and the speed of transport and communication facilities, applicable to various transport facilities. FeaturesWide temperature accommodationWide speed measuring rangeStrong shock resistanceGood tightnessNon-contact with tested gear, without abrasionConvenient installation, simple and reliableMain Technical dataOperating temperature -40+100Supply voltage 10VDC30VDCFrequency range 0Hz20KHzAir gap 0.1mm1.5mm,Standard installation value0.8mmGear m=2,number of teeth z=60,material: magnetic mild steelOutput waveform Square waveOutput channels 2Output voltage range (load =3 KΩ)High level VH≥Vcc-2.5V,low level VL≤1.5VPulse duty cycle 50%±20%Phase difference 90°±30°Current consumption without load≤60mAInsulation resistance ≥50MΩ500V megameterDielectric strength 1000VAC/50Hz/60sPolarity protection yesShort circuit protection yesVibration and shock Vibration: 30gShock:: 100gElectric interface Cable lead
Related Product Tags:
ABS , tray abs vacuum , abs system , brake pad sensor , camshaft sensor , engine speed sensor , speed sensors , table speed sensor , magnetic speed sensor , odometer speed sensor , speed sensor , kia pride speed sensor , abs sensor , rear abs sensor , abs sensors