OEM No/Model: C66
Introduction of Hydraulic Open Die Forging Hammer:
C66 Hydraulic Open Die Forging Hammer is mainly used in automobile parts forgings, motorcycle parts forgings, hardware forging, hand tools forgings, etc.
The operating system is simple, you can operate it by one hand or one feet to do hit, return, upslowly, down slowly, scram, hanging hammer and other action needed by forging process, this is similar to steamed hammer, but it is more labor saving and action flexbility and stability than steam hammer.
Features of Hydraulic Open Die Forging Hammer:
1. Energy saving and environmental protection.
2. High speed and high efficiency blowing increases production efficiency.
3. X type guide rails guarantee strong anti deviated loading ability.
4. Auto lubricating of guide rails.
5. PLC control, immediately starting and immediately apply into forging production.
6. Safety and easy operating by hand lever.
7. High efficiency cooling for hydraulic oil, which guarantee 8 hours non-stop production.
Parameters of Hydraulic Open Die Forging Hammer:
Model: C66-175 (5T)
Hit energy (KJ) : 175
Rated weight of falling parts (kg) : 6000
Maximum stroke (mm) : 1730
Hit frequency (min-1) : 45-50
Main oil pump (type) : A2F160R2P3
Main motor type (type) : Y280s-4-B35
Main motor power (KW) : 75
Motor/pump number (set) : 5
Electric-cooler type (type) : YLD800*2
Electric-cooler capacity (Kcal/h) : 80000*2
Electric-cooler power (kw) : 38*2
Guide space (mm) : 760
Working area (mm) : 3700*2000
Lower die surface (mm) : 800
Machine outside size (mm) : 6300*2700*8500
Oil tank outside size (mm) : 4500*2000*1600
Related Product Tags:
carburetor flange , Die Forging Hammer , flange yoke , flange yoke welding yoke , forging flange yoke , kamaz flange yoke , flanged hub , forged flange , forged flanges , flange pipe fitting , pipe fitting forged flange , lap joint flange pipe fitting forged flange , forged part , forged parts , forged round shaft , forged round shafts , hydraulic hammer , joint housing