Description
The Low-cost surface mount package SO-8 pressure sensor series is designed for pressure sensor systems with highest demands on resolution and accuracy. The series of pressure sensor is a small size piezo-resistive pressure sensor. The Die size is 1x1mm2. When the input voltage is 3VDC the sensor produces mV DC output voltage which is direct proportion of the input pressure. Pressure sensor is the absolute pressure sensor, and we can also offer the differential pressure mode.
Features
CHARACTERISTICS - SPECIFICATIONS
All parameters are measured at 5.0V supply at room temperature, unless otherwise specified.
|
Min | Typ | Max | Unit | Remarks | |
Excitation Voltage | 5.0 | V | ||||
Excitation Current | 1 | mA | ||||
Span FS Rang |
100KPa | 50 | 70 | 90 | mV |
1 |
150 | 70 | 100 | 150 | mV | ||
300KPa | 70 | 100 | 150 | mV | ||
700KPa | 70 | 100 | 150 | mV | ||
1.7MPa | 100 | 150 | 200 | mV | ||
Offset | -50 | 50 | mV | 2 | ||
TC Span | -24 | -19 | -15.5 | %FS/100 | 3 | |
TC Offset | -7 | +7 | %FS/100 | 3 | ||
TCR | +18 | +22 | +33 | % /100 | 3 | |
Linearity | -0.45 | -0.15 | +0.45 | %FS | 4 | |
Bridge impedance | 4 | 5 | 6 | K | ||
Proof Pressure | 2X | Fixed FS | ||||
Burst Pressure | 4X | Fixed FS | ||||
Operating Temperature | -40 | +125 | ||||
Storage Temperature | -55 | +150 |
PIN |
Description |
1 | NC |
2 | Out+ |
3 | NC |
4 | In- |
5 | In - |
6 | Out - |
7 | NC |
8 | In + |
Related Product Tags:
air conditioner mold , air conditioner mould , amplifier module , bearing mould , blower control module , bumper mold , automobile bumper mold , auto bumper mold , auto bumper mould , rear bumper mould , plastic bumper mould , automobile bumper mould , bumper mould , car bumper mould , front bumper mould , car bumper mold , casting mould , electronic control module