Barber colman Three-way Valve Bodies are the kind of Valve bodies which are available in three-way configuration as mixing and diverting valves. Sizes range from 1/2" to 6" pipe size or 5/8" O.D. SAE 45º copper tube.
Selecting the proper valve body requires the following data:
Fluid type
Fluid temperature
Port size (Cv rating)
Selecting the proper port size requires the following data:
Inlet pressure
Required flow rate in either GPM (liquid) or lbs/hr (steam).
If the customer is using on-off control, just select the valve body with the largest port size in the requested pipe size. Remember the following rule when sizing the valve for proportional control. At least one-half of the available pressure must drop across the valve body when the valve is fully open. An oversized valve body will result in very nonlinear control action. It is better to have too small of a valve body than too large of one. Please refer to the section on valve sizing (beginning on 5- 37) for complete data.
We provide valve bodies products,such as VB-7312-000-4-PP
VB-7313-000-4-PP
VB-7314-000-4-PP
VB-7323-000-4-PP
VB-9313-000-4-PP
VB-9313-000-5-PP
VB-9323-000-5-PP
Please contact us for more.
At the same time, we still can offer the items as below:
Barber colman Three-way Valve Bodies
Barber colman V-Series two-way and three-way globe valves
Related Product Tags:
Battery Housing , center armrest , cnc machining precise part , cnc machining precise parts , combination shaft , companion flange , coolant flange , crankshaft flange , drive flange , flange , flange screws , flange sleeve , flange type plunger , flange fork , flange machining , flange manufacturer , flange york , flanges