Type: rear-view mirror
Model: Butterfly
Type: Chery Wei Lin
Mirror Type: spherical mirror
Dimensions: 300 (mm)
Power supply voltage: 12 (V)
Mirror Material: Glass
Location: Shanghai Stem Lane
Part Number: ZC001
First, the product features:
New patented design, using the latest international blue film glare technology, the glass surface to form a 470 nm wavelength is satisfied fans coating, nano-crossing the membrane surface at the same time the formation of a permanent anti-rain and fog coating. Expansion of the product vision with no blind area, the international leading level of blue film features all-day glare, water fog all weather capabilities. Blue mirror while driving can greatly reduce pilot fatigue.
Second, the product features:
1, the vision: great view mirror design, based on the vision of the original cars increased 4.8 times the largest, non-visual corner.
2, glare: Blue Films with Nano technology to reduce reflection 80%, no anti-glare glare and enhance safety.
3, lowering fatigue: a large natural wide field of vision glare, easy to drive, greatly reducing fatigue.
4, super wear-resistant mirror, never fade; increase the contrast and visual clarity.
5, increasing clarity: to maintain surface <4%, to avoid distortion, increase the clarity of the unique blue mirror surface of 10%.
Third, the technical parameters:
Technical quality of the product by the China Quality Supervision and Inspection Center for determination of car, below the mirror and plane mirror quality comparison data were extracted using the following:
1, the average width of the vehicle rear vision (m):
On the left to expand 4.8-fold (2.95 meters) on the right to expand 2.5-fold (3 meters).
2, after field of vision angle between the outside and the body (degrees) increases:
1.7 times larger on the left (11 degrees) increased 2.1 times on the right (18 degrees).
3, after the vision area (rear end body 2 meters):
4.5 times larger on the left (25 square meters) increased 3.8-fold the right side of (15 square meters).
4, mirror mirror reflection rate of 80% (corporate standards> 40%).
5, moisture and humidity after the front mirror reflectivity ratio of 90 to 95%
6, door mirror distortion rate at 4%.
Fourth, the installation instructions:
Products have two ways to install one installed:
1, using paste method: blue mirror back with a strong adhesive paste, paste it directly into the original mirror to mirror, if you change to another car, just remove the blue mirror, with a detergent to restore the original car rearview mirror. Blue mirror with buffer layer, the road will not damage the original car mirror.
2, complete installation: blue mirror with a bayonet, just remove the original car mirror, blue mirror snaps into the rear view mirror box.
Related Product Tags:
bluetooth rearview mirror , Car Bluetooth Rearview Mirror , Handsfree Bluetooth Rearview Mirror , convex mirror , convex mirrors , dimming mirror , blind spot mirror , peugeot mirror , outer vision mirror , other mirror other parts , outer real vision mirror , outer rear vision mirror , mirror vios , mirror rearview , mirror frame , mirror gazil , mirror mirror , Mirror