The S700MC automobile structural steel plate and coil specified in this European Standard are applicable to hot-rolled flat products in the thickness range of: 1,5 mm to 16 mm for the steels which have a specified minimum yield strength of 700 MPa.
EN 10149-2 S700MC steel technical data
Chemical composition (cast analysis %, by mass)
C max. |
Si max. | Mn max. | P max. | S max. | Al min. | Nb max. | V max. | Ti max. | Mo max. | B max. |
0.12 | 0.60 | 2.10 | 0.025 | 0.015 | 0.015 | 0.09 | 0.20 | 0.22 | 0.50 | 0.005 |
Mechanical properties for thermomechanically rolled steel
Grade |
Yield Strength MPa min. | Tensile Strength MPa | Elongation % | |
< 3mm | 3mm | |||
S700MC | 700 | 750-950 | 10 | 12 |
S700MC steel formability
EN 10149-2 S700MC automotive steel is fine grain steel which has good cold formability. It is used for good cold forming performance and have higher or high strength requirements of automobile girders, beams and other automobile components.
Related Product Tags:
aluminium shot , aluminum block , mower aluminum block , mower aluminum block for toyota , aluminum foil , aluminum foil tape , aluminum profile , aluminum profiles , Aluminum Wire , bending part , bending parts , brass fitting , brass fitting valve , brass fittings , brass joint , cast steel grit , chain link fence , co2 welding wire