Standard: GB / T 1222-1984
Features and Scope: is the application of a wide range of silico-manganese spring steel, strength, flexibility and higher hardenability than 55Si2Mn.Suitable vehicle, automobile and tractor industries bear a greater load on the production of flat wire in the spring or coil spring 30mm below, also suitable for production of the operating temperature below 250 heat resistant non-corrosive media under alternating load springs andand work under high stress the important roll of large springs.
Chemical Composition:
C: 0.56 ~ 0.64, Si: 1.50 ~ 2.00, Mn: 0.60 ~ 0.90, S: 0.035
P: 0.035, Cr: 0.35, Ni: 0.35, Cu: 0.25
Mechanical Properties:
Tensile strength b (MPa): 1274 (130)
Yield strength s (MPa): 1176 (120)
Elongation 10 (%): 5
Reduction of area (%): 25
Hardness:
Hot, 321HB; Cold Drawn + heat treatment, 321HB
Heat Treatment Specification: quenching 870 ± 20 , oil cooling; tempering 480 ± 50 (when special needs, ± 30 ).
Microstructure: Tempered troostite.
Delivery status: hot-rolled steel to heat treatment or heat treatment delivery, cold-drawn steel to heat treatment delivery.
Related Product Tags:
aluminium shot , aluminum block , mower aluminum block , mower aluminum block for toyota , aluminum foil , aluminum foil tape , aluminum profile , aluminum profiles , Aluminum Wire , bending part , bending parts , brass fitting , brass fitting valve , brass fittings , brass joint , cast steel grit , chain link fence , co2 welding wire