Quick Details

• Length:

  340mm

• Width:

  160mm

• Height:

  200mm

• Place of Origin:

  Suzhou

• Samples:

  Not Available

• Delivery Time:

  25days

• Packing:

  Carton

• Delivery Port:

  Shanghai Port

• Max. Production Capacity:

  300sets/Month

• Export Ratio:

  11% - 20%

• OE Experience:

  No

Product Name:Welding Joint Detector

Welding Joint Detector

Application

Suzhou desisen electronics Co.,Ltd

Product Description:

 It adopts large screen LCD and large numerical display tube. The display interfaces are as the follows: histogram, cursor figure, wave shape figure and digital display. The users may select different display interface according to different sorting project, which make the quality condition of being detected display on screen clearly, and users can operate it much easier.

Instrument principle

Due to the different effect on magnetic field for harness value of magnetic materials, material classification, depth of hardening coating, technology condition of heat treatment and defects of components ( such as crack, air hole, inclusion ) and certain logic correspondences exists. When detected work-piece contact magnetic field detector distributed uniformly, it will produce a changeable magnetic field volume which may produce a magnetizing current on coil of detector and transmit it to instrument through wire. After being analyzed treated by central circuit in instrument, it will display the quality condition of detected work-piece on display. When comparing to the standard sample of detected project, it can rapidly identify and distinguish the material classification, hardness, depth of hardening coating, condition of heat treatment and defects

Features of instrument

1. Nondestructive detection, no special requirements for work-piece surface (prevent the damage to defect on surface condition of work-piece required by traditional detection method).
2.Easy and convenient to operate for instrument, give acoustic and lighting alarm for unqualified products ( It sets the function of man-machine dialogue in instrument, so it may work when two standard samples in the same work-piece are prepared and set easily)
3. Rapid detection speed (It is enough to contact appropriate detector when work-piece is fixed, the speed of it is higher dozens of even hundreds of than that of traditional detection method.)
4. It may meet the requirements of mass work-piece detection and ensure the quality of products (the 100% detection for work-piece prevents missed detection arising from conventional sampling detection).
5. The wide adjustable sensitivity range of instrument (the continuous adjustable detection current and frequency meet the requirement of different work-piece and detection project).
6. It can display the quality condition of detected work-piece visually due to wonderful graphics interface(it adopts two display methods of screen LCD and numerical tube, the display interfaces are as the follows: histogram, cursor figure, wave shape figure and digital display. It can observe the quality condition of detected work-piece visually according to the position of relevant graphics and cursor and then it may detect the type, hardness value, depth of hardening coating and carbon content of steel when relevant procedures are set.
7. The instrument is attractive in appearance, light in weight. DC/AC exchangeable( With light weight, it adopts high grade imported material for case, the built-in 12V maintenance free rechargeable batteries make it applicable to work in non-alternating current power supply)

Scope of application

Ferromagnetic materials, such as wire rods, plates, tubing, strip steel, billet steel and all kinds of automobile parts, standard components, bearing parts, forging, steel-casting, etc.
1. Distinguishing and identifying of types of steel for the same specification (material can be separated rapidly).
2. The hardness detection and rapid distinguishing of work-piece for the same specification under same heat ing treatment technology condition (hardness can be separated rapidly).
3. It may detect the carbon content of material for raw material of carbon structural steel (carbon is detected)
4. It can distinguish and indentify the defect of material and work-piece after being heat treated (flaw detection).
5. Detection and separation for depth of hardening coating.
6. It may identify and separate the mechanical capacity (such as strength) for work-piece after being heat treated
7. It distinguishes the different heat treatment condition for the same material

Technical features

1. Applicable conditions: regular work-piece and irregular work-piece of the same specification.
2. Separation precision: a. carbon: 0.03%C b. hardness: Brinell ± 10HB, Rockwell: ± 1HRC,c. depth of hardness coating: 0.2mm
3. Resolution ratio: a. carbon: 0.01%C b. hardness: Brinell ± 1HB, Rockwell: ± 1HRC,c. depth of hardness coating: 0.1mm
4. Detection speed: 1000-1500 piece/hour (up to the size of work-piece and proficiency of operator).
5. Power supply: AC 220V±10% , 50Hz ;DC 12V.
6. Service conditions: Ambient temperature: -10 ºC ~+ 40 ºC, relative humidity <75%.
7. Overall dimensions and weight: 364.1×191.6× 300mm , 8kg.
8. Types of external detector: sleeve type , flat surface type , pen type , rectangle type

Su zhou desisen electronics Co.,Ltd is specializing in researching and developing on automatic flaw detection system of eddy current flaw detector、sorting machine、ultrasonic flaw detector、all kinds of rod tube、metal accessories、auto parts,providing customers with complete testing methods and flow ...[Read More]

Company Profile:

• Main Product:

  Flaw Detector

• Business Type:

  Manufacturer

• Current Export Market:

  North America

Factory Profile:

• Shift:

  1

• Size of Factory In Square Meters:

  2000

• Years of OEM Experiences:

  17