Quick Details

• Voltage:

  12v

• Place of Origin:

  China

• Samples:

  Free

• Delivery Time:

  15days

• Packing:

  Cartons

• Delivery Port:

  Dalian

• Max. Production Capacity:

  5000sets

• Export Ratio:

  61% - 70%

• OE Experience:

  No

Product Name:Tire Inflator Tire Sealer Tire Sealant

Tire Inflator Tire Sealer Tire Sealant

Application

all tires

Product Description:

Tire Inflator Tire Sealer Tire Sealant

Inflator instructions 
1.Insert cigarette lighter of inflator into cigarette lighter socket,or clip car positive and negative electrode by crocodile clip,pay attention to not inverse(red is positive electrode,black is negative electrode )
2.Start the engine open the switch
3.Connect the air cock to tire valve directly when inflating
4.Note the dial indicators of pressure gauge when inflating,turn off the switch after up to the rated value,pull the air cock(air pressure rated value usually is 28-35PSI)
Tire sealant instructions 
1First find how many holes on the tire ,check how much tire sealant probably need.
2Remove the tire valve to the location of the clockwise 4 or 8.
3Shake the tire sealant fully,rotate the nut,cut off the top of bottle appropriate place.
4Remove the valve needle with valve core removal, put the mouth of bottle into tire valve,then,squeeze the bottle,pull the liquid into tire.
5Screw the needle of valve on,blow up the tire.Turn the tire running 2 minutes.
6After pressure test up to normal,it can be automatically repaired.We can drive safely.
Valve core removal instructions 
1.Rotate the tire valve cap off
2.Use the valve core removal aim to tire valve and insert into it,then rotate until valve core off.
Screwdriver instructions 
Use the special end of screwdriver aim to the top of the screw,fixate,then start to rotate handle
Tire repair knife instructions  
Used for cut the extra seal after repair tire.
Clyburn spanner instructions 
For tightening and loosening screws or nuts. When turning the handle clockwise to tighten. Fitted with a brace on the square sleeve. When the handle is pulled in the opposite direction, it stays in the beveled ratchet teeth slide, which screws or nuts not follow inverted. If you need to loosen the screws or nuts, simply flip the ratchet wrench to rotate in a counterclockwise direction.
Pincer pliers Instructions
For pulling out a tire wound rubbish (such as: nails, iron bars, broken glass, etc.), or for dismantling tires.

Our company was founded in the early of 1990’s,is lied in ANSHAN city which is called the steel capital and having advantage traffics.Main products of our company: cold mending adhesive strip, cold mending adhesive patch, mushroom whole filled cold mending adhesive patch, cold mending rubber ...[Read More]

Company Profile:

• Main Product:

  Tyre seal,tyre patch,tire glue,tyre valve,tyre repair tools

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Western Europe, Eastern Asia, Southeast Asia, Mid East, Oceania

Factory Profile:

• Number of Employees:

  51 - 100 People